Dear All
Can Chloride, sulfur, and Nitogen (1 %) in graphene oxide cause catalyst poisoning of TiO2?
Regards,
Poisoning: Strong chemisorption of species on catalytic sites which block sites for catalytic reaction
Chloride, sulfur, and Nitogen (1 %) in graphene oxide is possible or impossible to block sites for TiO2 catalytic reaction cause catalyst poisoning ?
sulfur(or chloride) in graphene oxide is sure possible to block sites for Pt/TiO2 catalytic reaction cause Pt catalyst poisoning.
Dear Prof.
Thanks for your reply, but i do not get the idea
so can Chloride, sulfur, and Nitogen (1 %) in graphene oxide affect TiO2 catalytic reaction negatively?
for your information we produce chlorlne at the Ti02 anode - do not worry about chlorine
Dear All Please, I have an inquiry concerning PMS/dark process for degradation of organic pollutants. I noticed that the PMS/dark process can work for degradation of my pollutant at specific pH...
03 April 2018 8,581 13 View
Dear All I found that my pollutant can be degraded at pH=10 (pH adjusted by NaOH) under PMS/dark process. Please, what are the possible reasons to justify this phenomenon. Apart from base...
03 April 2018 6,349 4 View
Dear All Please, are there any compounds that cause activation of sole H2O2 under visible light?
10 November 2017 6,802 2 View
Dear All Please, What is the reason for the low activity of Fe(III) impregnated TiO2 compared to sole TiO2 under visible light. Although the Fe(III) impregnated TiO2 led to a high shift in the...
09 October 2017 3,443 0 View
Dear All Please, what is the reason behind the addition of acid during the preparation of Fe-doped TiO2 using impregnation method? I did not add acid during preparation, but the catalyst changes...
07 August 2017 2,121 6 View
Dear All What are the possible reasons for activation of metal free catalysts in the presence of PMS at alkaline pH 9.3. Although the catalyst will be negatively charged and the pollutant is...
02 March 2017 9,107 5 View
Dear All Please, Can you provide me with a good reference for preparation of MnFe2O4(core)/N doped TiO2 (shell) using sonochemical method. I bought MnFe2O4 as a commercial material (60 nm) and i...
11 December 2016 9,132 0 View
Dear All Please, Can you provide me with a good reference for preparation of MnFe2O4/N doped TiO2 Core shell using sol gel method. Regards,
10 November 2016 6,077 0 View
Dear All I want to measure sulfate radicals concentration using dimethyl sulfoxide. Please, can you provide me with a reference for measurement of sulfate radicals using dimethylsulfoxide. Regards,
10 November 2016 431 5 View
Dear All Please, i want to measure hydroxyl radicals generated during photocatalytic reaction using salicylic acid. Please, what is the suitable concentration of salisylic or it depends on the...
09 October 2016 4,421 1 View
Hello, Why do i see this baseline drift when i compare my blank (black) to the sample (blue)? Any suggestions as to why this happened? Thank you!
11 August 2024 3,769 4 View
I'm currently working on calculating the collision cross section (CCS) for various ions, and I'm facing challenges when dealing with sodiated and multiply charged ions. Most of the resources I’ve...
08 August 2024 8,328 0 View
I want to know more about Magnetite deposits.
06 August 2024 1,066 0 View
Global ‘Weather’ has stopped, as ‘aqua thermionic instituted by the ‘Global thermo atmospherics has instituted global thermodynamics of 120º C + and thus all waters are, or have boiled into a...
06 August 2024 8,714 0 View
Greetings When one is to perform Simulation or modelling of Pyrolysis of Biomass Waste materials using Aspen Plus software, and one has both the macromolecules breakdown (Cellulose, Lignin and...
06 August 2024 5,023 1 View
I imagine the battery drives the graphite into a carbocation, then chloride is oxidized to donate the electron to the carbocation, but what pushes the lost electrons of chloride to be shared...
03 August 2024 5,384 0 View
I fabricated Ti3C2Tx using concentrated HF 40%, I plot an XRD as attached image below.. please let to know if I obtained it or not.
02 August 2024 6,788 4 View
I am in search of a modified Hummer's method, which can be used to synthesis graphene oxide within 6-8 hours. As I am a student it is not allowed for us to work after 5 in the laboratory. So I am...
01 August 2024 8,368 2 View
The starting material is a finely ground powder. Some particles contain more graphene than others.
30 July 2024 3,978 2 View
I am currently working on a project involving liposomes and need to determine the maximum volume of siRNA that can be added to a 2.5 mL liposome solution with a total lipid concentration of 10...
30 July 2024 6,418 1 View