Contact experts in XRD Analysis to get answers
1,471 views 471 posts
Questions related to XRD Analysis
I have X-ray data of Germanium thin films. I have calculated grain size using Scherrer eq. I have prepared an article. But referee said that my calculation is incorrect. Because I didn't eliminate...
01 January 2015 9,259 3 View
It is clear that this is done because of the enormous incease of speed, but how big would be the advantage using grey scale images? How much time it would take if speed wouldn't be the only rule?...
12 December 2014 3,923 2 View
Hi, in the late '90s I used a software package from AIC Software Inc., called Photcoef, to calculate the ionizing dose / energy deposited and attenuation of x-rays and gamma rays through material...
12 December 2014 4,551 2 View
I'm looking for weight fraction of my ceramic-nickel composite by using XRD. In order to calculate the fraction using RIR method, I need to know the I/Ic ratio of nickel. However, in the database...
12 December 2014 4,984 3 View
As far as I know, XRD is a fingerprint of elements and compound. Peak positions and indexing of peaks, grain size could be done from it. We can come to know the structural phases present and...
12 December 2014 5,605 8 View
Thanks in advance.
12 December 2014 1,845 7 View
I am refining the XRD patterns using Fullprof and I have the Si standard sample XRD pattern. How can I use it for refining?
12 December 2014 4,628 5 View
I'm trying to perform semi-quantitative analysis on multiple-phase sediment samples. I've succeeded in identifying the different phases, but I don't know how to adjust their peak heights optimally...
12 December 2014 5,347 6 View
I need to know how to extract data from the XRD image and plot it in origin 8.
12 December 2014 2,843 18 View
I want to use the CIF file for XRD quantitative analysis. More information about crystal structure of Mo(Si,Al)2 can be found in the attached article.
12 December 2014 9,333 3 View
Can anyone tell me difference between XRF and X-Ray Reflectivity (XRR)?
12 December 2014 4,680 3 View
Sample: Polymer films Instrument Configuration: Bruker D8 Discover with Lynxeye detector
12 December 2014 3,626 6 View
For an XRD study I have downloaded the fullprof tool bar. But I could not use it. Because I have files with a uxd extension. How to convert it to dat or exe extension. If there is any other...
12 December 2014 1,825 3 View
In the conventional solid-state synthesis of barium hexaferrite (BaFe12O19) before complete crystallization of BaFe12O19, an intermediate phase of barium-monoferrite (BaFe2O4) was formed. In some...
12 December 2014 9,638 7 View
I have results for FTIR, SEM, UV and XRD of my sample. As a beginner, I really need of books which helps me to interpret the characterization results. Some basic books to understand the concept of...
12 December 2014 8,115 4 View
I am trying to synthesize MnO2/Graphene composite by hydrothermal method. Thereafter, when I recorded XRD, I observed there is slight shift in XRD peak towards lower theta value. As per my...
12 December 2014 2,626 17 View
Hello everyone!please answer my questions. 1. Is the particle size calculated by Debye-Scherrer formula necessary to consider the FWHM of the instrument? 2. Is this formula accurate to calculate...
12 December 2014 7,226 5 View
I would like to simulate XRD pattern by modifying atomic position in a crystal structure obtained from Rietveld refinement. what software allows to do that?
12 December 2014 5,100 4 View
Are crystallite size and particle size are the same? If not, then how can particle size be calculated from XRD data?
25 November 2014 5,841 12 View
Pls give me the answer for my questions.
20 November 2014 9,596 2 View
XRD analysis of pure ZnO and Cu-doped ZnO was performed
11 November 2014 4,601 5 View
I performed XRD for Mg-matrix composites, which has different amounts of added particles (Mg/10%HA and Mg/20%HA). I would like to know which composite has more amount of reaction products (MgO) in...
11 November 2014 8,115 6 View
I have repeated this experiment many times and at different pH from 7-11 but every time XRD show nothing. can any one please explain this for me ??
11 November 2014 4,159 8 View
I have XRD pattern and already I have calculated particle size but now I want calculate strain and stress. How should I calculate it?
11 November 2014 8,685 8 View