Contact experts in Materials Chemistry to get answers
1,848 views 1,958 posts
Questions related to Materials Chemistry
Hi, I am a master's student, I am trying to coat the Silica nanoparticles with LiOH. To make possible the LiOH precipitation on the Silica surface I chose to exploit the non-ideality of an...
07 July 2017 1,822 1 View
Hi all, I want to electroplate Titanium on steel. Most papers have discussed about molten salt as electrolyte. But can we use electroplating in aqueous media. Titanium is very reactive, will there...
06 July 2017 1,180 6 View
Can I assume that the double alkali phosphate NaCrP2O7 has a structure like NASICON and is an ionic conductor? What electro-physical properties can be expected from the coating if NaCrP2O7 is...
05 July 2017 8,982 2 View
Generally, due to spin-orbital coupling, the metallocages based on heavy metals should not show emissive properties. But, many Pt(II) based metallocages show emissive properties and at the same...
03 July 2017 2,079 3 View
Since GCE and Au are both planar electrode with excellent conductivity. What causes the performance differences?
03 July 2017 5,711 5 View
Hi Dears, Is there anyone to know about the commercial catalysts for the polyester polyol production? Regards, Alizadeh.
02 July 2017 7,187 5 View
Hi, for a trapping experiment I'm looking for an allyl-substituted dye or fluorecent molecule. Many thanks! Andreas
29 June 2017 3,446 3 View
I'm synthesizing MOF via electrochemical method and I need to know the electron transport mechanism
28 June 2017 3,088 1 View
I am doing project based on dispersion of alumina nanoparticle in vegetable oils
27 June 2017 195 5 View
Any report available on the impact of pressure (UHV?) on the stability of methylammonium lead iodide?Thanks for helping,Marco
26 June 2017 9,571 1 View
Graphitization of the carbonized materials1.0 g of the carbonized materials and 0.5 g FeCl3.6H2O were added to 100 mL distilled water. In addition, the pH of the solution was adjusted 2 by adding...
24 June 2017 2,868 4 View
During synthesis of graphene, how the structural change happens? What exactly the mechanism that is followed here?
22 June 2017 3,872 2 View
I am doing electrodeposition on the Zn surface(anode) from phenol solution, but my polymer is not well distributed. Applied potential is 40 mV for 30 minutes. Could you please suggest some...
21 June 2017 9,749 1 View
I am trying one coordination polymer as electrode material on glassy carbon electrode. It is showing good stability. What can be the reason?
20 June 2017 9,548 6 View
mechanism of Carbonate apatite formation by using Ca and role of Ph
20 June 2017 9,041 1 View
Has anyone made a carbon paste electrode using activated charcoal? What is the advantage of using graphite over activated charcoal to construct a CPE? Also Is there a way to remove the impurities...
19 June 2017 9,369 2 View
The polymer is used as anode material.
19 June 2017 6,303 1 View
I am using Zycotherm with conventional binders, VG-10, VG-20 and VG-30 for my research work.
15 June 2017 5,948 6 View
OER in Alkaline media
14 June 2017 7,802 1 View
After sintering pellets are very fragile although XRD shows pure phase VO2. How can we get dense VO2 pellets?
13 June 2017 9,399 3 View
Pd@ZnO core-shell structure, as synthesized Pd@ZnO is not fully crystalline, annealed at 500C-2h, Vacuum-Argon atmosphere, XRD patterns shows PdZn alloy peaks at 41 and 44 degrees. ZnO and Pd...
13 June 2017 1,091 2 View
After sintering pellets are very fragile although XRD show pure phase. what is the possible solution for this problem?How can we get dense ZrCeO2 pellets?
13 June 2017 7,073 6 View
I am trying to measure dielectric constant and loss of a thin film polymer (PVDF-HFP). Usually I am using Gold, which is sputtered on my samples as electrodes. Today I accidentally coat my sample...
13 June 2017 3,802 3 View
It says that sodium acrylate is used as a stabilizer and to improve solubility of the precursors. And without its presence the particles aggregate. Can I use PVP instead??
13 June 2017 8,074 3 View