Contact experts in Materials Chemistry to get answers
1,846 views 1,958 posts
Questions related to Materials Chemistry
I am using Zycotherm with conventional binders, VG-10, VG-20 and VG-30 for my research work.
06 June 2017 6,716 7 View
I was trying to use an alternative way to measure the I-V of RGO on copper immersed in NaCl. I got three peaks. (-50 mV, 175mV, and 275 mV) roughly. What do they account for ? are they because of...
06 June 2017 5,881 3 View
Specifically, I am trying to passivate a thin film of air sensitive nanoparticles and optically characterize them in the NIR region. I am looking for polymers that can be solution processed using...
06 June 2017 6,716 2 View
Pd@ZnO core-shell structure, as synthesized Pd@ZnO is not fully crystalline, annealed at 500C-2h, Vacuum-Argon atmosphere, XRD patterns shows PdZn alloy peaks at 41 and 44 degrees. ZnO and Pd...
06 June 2017 8,024 2 View
How to prepare the dye solution?
06 June 2017 2,991 7 View
OER in Alkaline media
06 June 2017 6,128 1 View
I am trying to measure dielectric constant and loss of a thin film polymer (PVDF-HFP). Usually I am using Gold, which is sputtered on my samples as electrodes. Today I accidentally coat my sample...
06 June 2017 6,657 3 View
Now I'm preparing several TiO2 films for photoelectrochemical CO2 reduction. I want to fix the amount of TiO2 what I want at each film for comparing photoelectrochemical acitivty of TiO2 films.
06 June 2017 1,210 2 View
After sintering pellets are very fragile although XRD shows pure phase VO2. How can we get dense VO2 pellets?
06 June 2017 6,756 3 View
I want to prepare ATO transparent, conductive films using doctor blade method on transparent conductive substrates. For this porpose I use an aqueous ATO colloidal solution containing 15-30% (wt)...
06 June 2017 1,136 5 View
After sintering pellets are very fragile although XRD show pure phase. what is the possible solution for this problem?How can we get dense ZrCeO2 pellets?
06 June 2017 4,110 7 View
What material is recommended for tubing when measuring low concentrations (0 - 1ppm) of hydrogen peroxide? PFA? PTFE? What coating material would you recommend to reduce adsorption of H2O2 on...
06 June 2017 3,660 0 View
It says that sodium acrylate is used as a stabilizer and to improve solubility of the precursors. And without its presence the particles aggregate. Can I use PVP instead??
06 June 2017 2,862 4 View
what is the effect of pH variation on the zeta potential of (Iron/Graphene) oxide nano-composite?
06 June 2017 1,286 2 View
BSA is bulky protein molecule. when it used as capping agent using borohydrate as reducing agent is it borohydrate to unfolding of Protein is there any change in the nature of protein and how it...
01 June 2017 2,659 3 View
I want to know, what is the best way to decorate the smallest size of Polyaniline on graphene quantum dots? best regards
31 May 2017 8,846 2 View
I am trying to exchange water for an organic solvent. PMMA particles are in water.
30 May 2017 8,639 3 View
what is the synthesis route for copper paint drier?
30 May 2017 5,365 1 View
We have prepared some catalysts with some modifications, but the core structure is the same. we have recorded the Xrd patterns. some of them are the same. It should be mentioned that the melting...
30 May 2017 7,019 8 View
Dear All, We are working on a project to investigate IMCs precipitation in AL-Zn alloys. They are primarily alpha-AlSiFe IMCs present in the temperature ranging from 575 - 610 deg C. I need your...
29 May 2017 1,050 5 View
I Need to know different Position of cations and types of possible impurities in Natural zeolite Clinoptilolite.
29 May 2017 9,175 1 View
Affordable and simple in the sense, the experimental arrangement for the test should not be very costly and complex.
27 May 2017 3,361 5 View
I want to know the size and the ratio of silicon and aluminum beta zeolite has been synthesized,how to synthesize large size of beta zeolite by hydro-thermal synthesis. research status or some...
24 May 2017 3,535 1 View
I am doing plasma spray of FA mixed with Ti powder (different percentages) to coat Ti alloy. I have done wettability test and 50% FA 50% Ti is the most hydrophilic, I need explaination
23 May 2017 8,247 3 View