Contact experts in Heat to get answers
2,398 views 1,522 posts
Questions related to Heat
Does magnetic field can heat the human body? According to the International Commission on Non-Ionizing Radiation protection (ICNIRP), there is a maximum allowable magnetic field exposure to our...
15 October 2020 7,799 3 View
When extracting lipids with the MTBE method, the indicated temperature is RT. In addition, drying the samples in a speedvac is mandatory due to the presence of water and such procedure is long and...
15 October 2020 10,023 2 View
Hello everyone, I’m an engineering student and would like some suggestions for my current project. I would like to simulate the temperature of a liquid contained in a box over time. This fluid...
15 October 2020 3,144 3 View
sir, I have developed a moving heat source on the plate which has to be joined in butt configuration in ANSYS workbench. Now I want to simulate the weld pool and motion of liquid in the weld pool...
14 October 2020 860 1 View
For example investigating the entropy generation number or entropy generation through heat and mass flow
11 October 2020 4,750 4 View
I am looking for a wear detection method for a pipe that goes under intense heat and pressure for short instances at intervals. this process has an average cooldown time of 8 seconds between each...
09 October 2020 3,989 2 View
I have data from an experiment where we looked at the time-to-death of pseudoscorpions under three treatment conditions: control, heat, and submersion underwater. Both the control and heat groups...
01 October 2020 5,403 3 View
I have a large dataset (in Excel) of HR "people" data (job title, location, etc) and I need to perform statistical analysis to search for correlation among this information, particularly if there...
01 October 2020 609 5 View
Is there any DNV clause for shell side nozzles' projections of shell and tube heat exchanger. I want to keep the outside projection of the shell side inlet and outlet nozzles to 3" with 1" bore on...
30 September 2020 7,133 3 View
Hello, I'm about to start a new industrial project in which we want to estimate (interpolate) the INDOOR temperature at unknown 3D positions in possibly complex 3D room geometry based on sparse...
29 September 2020 4,405 3 View
As the excessive as well the insufficient heat lead to complex changes in the microstructure as well the grain structure of the base material due to which the materials property were affected. How...
24 September 2020 9,970 20 View
Male Infertility is a major public health concern worldwide and there had been heated debates to date on the above question; in other words is Boxers vs. Briefs related to Increasing Sperm Count...
22 September 2020 2,586 12 View
In solar desalination still, the water is heated by the absorbed solar energy. At some point, the temperature in the still reaches the boiling temperature. I would like to understand the...
10 September 2020 1,194 3 View
Any of your precise suggestion would be highly appreciable.
10 September 2020 4,920 4 View
I have written code for a for a Heat Exchange Reformer in Aspen Custom Modeler, but it cannot run. The program describes a shell and tube heat exchanger with steam methane reforming reactions...
08 September 2020 2,265 9 View
I have been trying to calculate heat function value by the equations given in the equations.png file. The geometry is a rectangular cavity with isothermal sidewalls and the top and bottom walls...
07 September 2020 830 4 View
BCS equation corresponding to electronic heat coefficient is given to the attachment.
07 September 2020 6,338 3 View
How to calculate Nusselt number if an enclosure is heated from two sides (horizontally and vertically)?
03 September 2020 1,613 8 View
We are doing heat inactivation of ligation reaction at 65 C after 12 hours of incubation at 16 C but we are having a problem in getting colonies.
01 September 2020 8,160 3 View
In general stove heat moves from the bottom to top in even manner. But in case of micro oven most of the times top layer only we get more heat compare to bottom. What could be the possible reason.
30 August 2020 3,400 27 View
When we radiate a solid film with gamma radiation, the film will experience a temperature rise. But we don't have access to the film to measure the change in temperature. How to calculate the...
15 August 2020 9,890 5 View
Hello all, Can anybody give me an idea of how much laser fluence is enough to excite measurable acoustic signals in photoacoustic imaging? I'm specifically interested in excitation wavelength of...
07 August 2020 7,192 3 View
Multi-phase flow instabilities in liquefied natural gas cryogenic heat exchangers affect flow distributions in the system adversely. This consequently has negative impact on the energy consumption...
31 July 2020 9,835 2 View
For cooking pots to work on an inductions stove ferromagnetic material is needed. However, aluminum foil does not contain ferromagnetic material. With a thickness of 0.016 mm the aluminum foil is...
30 July 2020 6,590 5 View