A computer based method of simulating or analyzing the behavior of structures or components. | Contact experts in Finite Element Analysis to get answers
2,517 views 2,703 posts
Questions related to Finite Element Analysis
I am applying "electric potential" boundry condition at top surface and specifying the bottom surface as ground. But for applying terminal boundary condition at top surface I am facing problem as...
07 August 2023 6,017 3 View
YES! THIS HAS BEEN SHOWN IN “PLANAR CRACKS IN UNIFORM MOTION UNDER MODE I AND II LOADINGS” (ANONGBA 2020). Earlier works have suggested that crack speeds v could not exceed Rayleigh wave velocity,...
04 August 2023 6,342 1 View
This question is reffered for transient based VOF simualtion.
02 August 2023 5,733 1 View
Hello I wanted to ask about the implementation of accidental torsional effects. Typically, there are two ways in which you can apply accidental torsion: apply static torsion directly offset the...
02 August 2023 5,389 0 View
regarding to find heat flux on tube surface and boiling heat transfer coefficient, should I use Area weighted average or Facet Average ?
28 July 2023 2,014 3 View
CERVICAL VERTEBRAE OF HUMAN BEING FROM C1-C7.
14 July 2023 5,468 2 View
I have created Node files, Element files, and Prep7 command, But if there is imported in mimics Mash Tab, then there will be an unknown file. please help me, Where is the problem??
13 July 2023 1,611 0 View
Dear All, Anyone has access to PTI FelixGX 4.2.2 software. We have PTI quantamaster 30 fluorescence spectroscopy in our lab. Unfortunately, the software FelixGX 4.2.2 got uninstalled from the...
11 July 2023 981 0 View
PE or EVA hotmelt adhesive
09 July 2023 1,844 0 View
analyzation of wind flows around wind turbines around wind using Matlab codes and models.
07 July 2023 1,293 2 View
for example, schematics or illustrative drawings of something, normally when it is of machinery or something structural, I use CAD software for this, but in other more illustrative cases I don't...
06 July 2023 5,023 2 View
I am doing an analytical modal analysis based on CPLT and Ritz polynomials, is it any way to correlate the obtained natural modes to their corresponding ones from numerical modal analysis of...
05 July 2023 4,355 6 View
I have a longitudinal dataset for 500 sensors reading at 25 time point. I want to cluster those sensor readings at each time point , from T1 to T25 bur I want to know which cluster each sensor...
28 June 2023 4,543 4 View
I'm currently searching for a colloid mill named "JIM-150, Wenzhou Kangding Machinery Co. Ltd., China" which is mentioned in several research articles. However, I'm unable to find this kind of an...
21 June 2023 5,220 0 View
Hypersonic vehicles, which travel at speeds greater than Mach 5, experience extreme thermal and mechanical loads during flight. The objective of this research is to investigate the behavior of...
09 June 2023 8,692 1 View
I'm struggling to obtain the right behavior of gfrp bars, in the process of validating my model i achieve a bilinear behavior in the displacement x force graph when using gfrp bars as...
09 June 2023 6,814 2 View
How to find out ovaling in circular tunnel under transverse seismic loading from plaxis 2d in comparison to free-field condition?
01 June 2023 8,216 0 View
There is no doubt about the equivalence between the dynamic stiffness method and the finite element method. However, there are currently many extensions of this equivalence in Euler beam theory,...
31 May 2023 9,858 2 View
Hello Everyone, I am trying to simulate rubber behavior by giving incremental cyclic displacement. When I generate a force-displacement curve I get spikes near zero displacement as shown in...
30 May 2023 2,790 0 View
Hello, I am using the CEL technique to simulate the FSW process. After completion of the simulation, when the ODB file is analyzed in the visualization module, in every output parameter, such as...
24 May 2023 5,497 4 View
what are the recent technologies solving this problem?
17 May 2023 3,897 4 View
There is no clear explanation for the formation of triiodide anion from the reaction of iodine molecule with iodide ion.
14 May 2023 779 1 View
Hello... As you know, there are similar points about these two, so please answer this question.
12 May 2023 7,595 1 View
We need to blend PBT and ASA but we lack information. I cannot find anything definite online. The one thing I found was that the ratio is something between 60 and 80% PBT, the rest is ASA. But I...
02 May 2023 6,391 0 View