A computer based method of simulating or analyzing the behavior of structures or components. | Contact experts in Finite Element Analysis to get answers
1,737 views 2,144 posts
Questions related to Finite Element Analysis
I want to go through the same method FEA softwares are using. Apply meshing and FEA on CAD geometry? How can I do it? Which book to follow?
21 July 2021 2,142 3 View
Hi Everyone, I have an assembly parts that mated together. the bolt connector is defined to hold them together. There are 4 parts that been bolted together which is washer (solid element), Sleeve...
21 July 2021 795 3 View
Is there any analytical formula that relates the longitudinal deformations to the transverse deformations of a cantilevered beam subjected to a transverse applied load?
19 July 2021 167 3 View
Dynamic analysis of Four bar mechanism is possible in 3D space of ADAMS View. But, what about 2D analysis? Thanks in Advance.
10 July 2021 5,190 2 View
I'm Performing slope stability analysis using FLac3D. 6.0. the constitutive and seismic waves seem correct, but the software still refuses to perform
09 July 2021 5,807 6 View
I'm going to analysis of theorical RC beam by FE nonlinear analysis then verify the RC beam models with FEA softwares.
06 July 2021 9,311 11 View
I am trying to study the mechanical properties of shales by Atomic Force Microscopy (AFM) nanoindentation. However, I have had some problems with measurements becuase some minerals (which compose...
29 June 2021 628 4 View
I am not sure whether to use boolean A glue command to glue the areas / lines of my model together. OR just use merging nodes NUMMRG, node command My model is a static linear bridge element...
28 June 2021 470 3 View
1. Material Processes: Welding Research. 2. Materials: Composites, Plastics, Metals, exotics, etc. 3. Following the welding process, certain alloys (e.g., aluminum) lose their mechanical...
22 June 2021 6,932 2 View
Hi everyone. I am interested in studying the mechanical behavior of cells using nanoindentation experiments simulated by finite element analysis. Following the literature, cells usually show a...
20 June 2021 5,948 3 View
Prediction of extrusion force is most important before do the experimental work. In this, suggest equation to find extrusion force, die failure criteria, punch failure criteria. in other words...
19 June 2021 9,984 3 View
I want to plot a force-displacement curve for a static RIKS Nonlinear analysis model, so I need to get the point that has the highest displacement to do this.
17 June 2021 604 1 View
I need two model heat exhanger between air and water. But air will be admitted in liquid state at negative temperature and on leaving the heat exchanger it should be in gaseous state. In this...
08 June 2021 1,878 11 View
The Huygens–Fresnel principle has every point on a wavefront become the source of spherical waves, and different points mutually interfere, and they sum to a new wavefront. This seems to conserve...
04 June 2021 5,578 5 View
Most of the research regarding hydrogen production by water electrolysis deals with improving catalysts for HER and OER. There are many papers claiming the production of low cost, yet Pt like...
03 June 2021 519 10 View
hello dear friends when I submit the job it says completed without any warning but when I proceed to visualization it gives me a message like on the png file uploaded below. can anyone help me...
01 June 2021 8,918 0 View
Hello, I am student of the Civil Engineering department of Aristotle University of Theassaloniki. I tried to run the analysis of the file THEMA_QUAKE.txt and i got the following reports. Could...
29 May 2021 8,472 4 View
I am modelling concrete beam strengthened with FRP fabric in pure flexure zone on ATENA 3D. How can I define a material property for my FRP fabric? I am modelling the fabric as a macro-element...
26 May 2021 1,303 2 View
I am working on FEM Simulation of Crack Susceptibility in PBF additive manufacturing. Perhaps, Could not find a way to evaluate residual stress threshold value for crack prediction through...
26 May 2021 6,974 3 View
I tried performing non-linear analysis of a RCC column in ANSYS 2020 R2 using SOLID65 and CEINTF. I got the following errors. I have attached the SOLID65 and CEINTF codes and the excel sheet...
20 May 2021 9,767 0 View
hello I'm having an issue finding a good format to import into Abaqus a mesh file from rhino. For now, I've only been able to import Brep information via ACIS and IGES format but there is no...
20 May 2021 4,784 2 View
Suggest the best review papers for Finite Element Analysis of Sheet metal forming.
14 May 2021 3,176 2 View
Dear All, I am working on numerical analysis of the Friction Stir Welding (FSW) process using Abaqus. The model compressed of johnson cook flow model, ALE Adoptive Remesh to avoid distortion...
14 May 2021 4,842 2 View
Does anyone encounter this type of warning in ETABS/sap2000? "MAXIMUM NUMBER OF TOTAL STEPS REACHED FOR. CASE: LATERAL FORCE CONTROLLED. SUBSEQUENT RESULTS WILL NOT BE AVAILABLE" Pls see attached...
13 May 2021 6,580 0 View