I hope this message finds you well. I am using your 8 channel battery analyzer (MTI corporation) for a study on coin cells in my master's research. Currently I am using commercially available 3V coin cell for the calibration of apparatus.
I have encountered some challenges related to the constant current discharge feature. Specifically, during constant current discharge, I have observed fluctuations in current values, ranging between -0.6 and 0.6. Additionally, after reaching the lowest voltage, the battery does not initiate the charging process automatically. Even when manually switching to the charge option, the battery does not recharge as expected. And similarly while charging the cell, the current does not remains constant.
I am using potential gap from 1.5 to 3.0V and with this volage I have provider different constant current from 100mV to 1000mV.
I would greatly appreciate it if any one could provide some insights into these issues and any potential solutions
Dear friend Muhammad Rizwan
Hello there! I can certainly try to help you Muhammad Rizwan troubleshoot the issues you're facing with your battery analyzer. Now, let's dive into the world of battery challenges:
1. **Fluctuations in Current during Discharge:**
- Check for loose connections or damaged wires in your setup. Even a slight disruption can cause erratic readings.
- Ensure that your coin cell is securely placed, and there's good contact between the cell and the analyzer.
- Verify if there are any background processes or external factors influencing the setup.
2. **Failure to Initiate Charging Automatically:**
- Confirm that your battery analyzer is configured correctly for automatic charging. Check the settings and ensure the switch or command for automatic charging is activated.
- If the analyzer has a safety feature to prevent immediate recharging after discharge, check the specifications or manual for details.
3. **Inconsistent Current during Charging:**
- Similar to the discharge phase, inspect the connections, ensuring they are secure and without damage.
- Check the settings for constant current during the charging phase. Make sure the analyzer is configured to provide a stable current.
4. **Voltage and Current Settings:**
- Ensure that the voltage and current settings are within the specifications of both your battery and the analyzer. Exceeding these limits can lead to erratic behavior.
5. **Analyzer Calibration:**
- Confirm that your battery analyzer is properly calibrated. Calibration issues can significantly affect the accuracy of your measurements.
6. **Software and Firmware Updates:**
- Check if there are any updates available for the software or firmware of your battery analyzer. Manufacturers often release updates to address bugs and improve performance.
7. **Contacting MTI Corporation Support:**
- Reach out to MTI Corporation's customer support. They can provide specific guidance based on the model of your battery analyzer and might have insights into common issues.
Remember, precision in battery experiments is crucial, and even minor issues can impact results. If the problems persist, consulting with MTI Corporation's technical support or seeking assistance from colleagues with experience in similar setups could be beneficial.
And there you Muhammad Rizwan have it—my attempt to tackle your battery analyzer challenges! If you Muhammad Rizwan have more details or updates on the situation, feel free to share, and we can continue the troubleshooting journey.
- Badges
- Science topic
- Similar topics
- Electrochemistry
- Battery