15 Questions 22 Answers 0 Followers
Questions related from Teo Raymond
New research questions has arose from previous ones. Q1: https://www.researchgate.net/post/Is_it_possible_to_carry_out_Proximate_analysis_via_Thermogravimetric_analysis_TGA Q2:...
27 December 2017 7,364 3 View
During experiment, a pyrolysis reactor was constantly heated with 825 Celsius of heat for 2 hours with other parameters remained constant. How can I set in Solidworks Cosmos/ ANSYS Fluent to...
06 November 2017 7,436 2 View
Assuming the reactor is of pilot-scale or bigger, feeding feedstocks only when the reactor has reached steady state temperature distribution is rather time consuming and inefficient not to mention...
18 October 2017 8,089 5 View
TGA can be used for proximate analysis. However, the samples generally used are raw polymers such as tire chips and so on (Menczel and Bruce Prime, 2009). I need to carry out proximate analysis...
13 October 2017 5,776 4 View
Studies showed TG/ TGA mostly carry out on raw tires to determine its thermal degradation performance. My intention is to determine the compositions of fixed carbon, volatile organic, ash and...
02 October 2017 9,434 5 View
Heating rate is one of the vital parameter in determining the by-products' compositions besides by-products production in a pyrolysis process. It is generally researched in kinetic study, TGA...
15 September 2017 4,515 5 View
Attached along is a picture of tabulated "literature survey of results of waste tires pyrolysis" by Giorgini et al. in 2015. 1. How was the feedstock size measured in these studies? 2. Does...
16 November 2016 5,031 3 View
Papers I read indicated allothermal = external heating and auto = internal. How to differentiate internal and external heating? In my scenario, one FBC (sand as bed material) is heated using LPG...
13 October 2016 7,838 5 View
Literature studies showed perforated plates were generally and widely used. Literature studies also showed fine sand (in microns) were used generally. Can I use bed materials of average size of...
01 June 2016 1,384 2 View
The questionnaire has a Cronbach's alpha of .838. However I am concern that the questionnaire is not having a correct construct. So, how can I validate a questionnaire's construct using...
29 November 2015 6,158 20 View
A closed circuit test track basically is for people to race and therefore has no speed limit, right? So how can I differentiate speeders and non speeders by carrying out test drives on test tracks...
12 September 2015 3,990 2 View
Is there any driving behaviour studies done thus far comparing test tracks (closed circuit) driving and naturalistic (highway, rural, city) driving via instrumented vehicle? Please kindly attach...
11 September 2015 7,288 3 View
I am studying about speeding driving behaviour via instrumented vehicle. I have carried out my experiments on a test track using a conventional sedan-type instrumented vehicle. However, I am...
09 September 2015 7,205 8 View
I am trying to psychologically predict drivers' speeding driving behaviour via driver behaviour questionnaire (DBQ) as a whole. However, I am unable to mathematical model of the drivers via DBQ...
28 April 2015 1,245 7 View
The pyrolyser/ pyrolysis reactor is heated to the pyrolysis temperature and feedstocks are fed into the system without purging of inert gases. What will happen? Products obtained are PHYSICALLY...
01 January 1970 8,353 5 View
