Resistivity of PVD TiNx thin films vs. N2 flow?

In the PVD of TiN thin films (~100A), I've found the resistivity of the TiN films dropped from ~100 to 60um*cm with N2 flow increasing up to the metallic mode ending point; then the resistivity...

21 February 2021 1,864 2 View

Do you have some articles to recommend about comparative experimental study about gas and water flooding with oil reservoirs?

I would like to know in the oil extraction, which is more efficient: gas flooding or water flooding? Will water flooding be more efficient in hydrophilic reservoirs with capillary...

29 December 2020 3,471 3 View

What does this PZC data mean?

I measured different kinds of catalysts which were dispersed in DI water.I firstly added certain amount of HCl and then used NaOH to titrate and measure the pH value. What does this result mean?

27 December 2020 5,728 4 View

How to inhibit the ion conversion between Mn4 + and MN2 +?

Dear scientists, I have a question to ask you, it is known that Mn4+ is beneficial to the soil, but part of Mn4+ in the soil is easy to be converted to MN2 +, is there any way to inhibit its ion...

21 November 2020 1,200 5 View

Failure in using Gene Pulser Xcell (Biorad) ?

02 October 2020 8,642 1 View

Hi everyone, how can we remove the snow-covered areas in global scale?

We obtained the global results using remote sensing reanalysis dataset. But the snow-coverd areas should be removed (like the blank area in the picture below, sources: Purdy et al., 2016). Does...

20 September 2020 3,463 5 View

How to set the fluent simulation species transport density item?

I use fluent to simulate species transport. The medium is sulfur hexafluoride and air. There is a density item under the mixture, and there is also under the fluid. Is there any difference between...

29 July 2020 7,414 4 View

How to detect brown pigments generated in red wine aging process ?

During aging or storage, the concentration of monomeric anthocyanins decreases rapidly, while low level of polymeric anthocyanins generates, and the color of wine turns brick-red gradually. In...

17 July 2020 6,032 4 View

How to calculate mode overlap ratio in Comsol ?

As is shown in attachment, there is hybrid plasmonic waveguide (HPW) and dielectric waveguide (DW), I want know how to calculate mode overlap ratio to evaluated the mode distribution similarity...

14 July 2020 2,275 3 View

Is there any organic solvent for MnCO3?

Since that my experiment could not be proceeded in aqueous. Anyone who know is there any organic solvent for MnCO3, the concentration could be as low as several mg/mL. Thanks

02 July 2020 9,654 19 View

Protein-aptamer gel electrophoresis help, please??

Hi, I have problems with running gel electrophoresis. I have tried agarose gel electrophoresis and native PAGE. I have two proteins, which have molecular weights of ~30kDa and ~180kDa and two...

03 March 2021 4,275 4 View

What are some important techniques for protein induction and SDS-PAGE analysis?

Hello everyone. I am fairly new in protein chemistry field. I am trying to perform a protein induction hoping to purify my protein of interest using FPLC method. However, I am having trouble on...

03 March 2021 8,237 3 View

SDS page software for analysis?

I did sds page to determine the difference in protein expression between 3 types of vaccine , but i don't have scanner or densitometer available. . so i wonder if there is a software to analyze...

02 March 2021 6,270 3 View

Precipitate after adding laemmli buffer to protein solution containing Potassium Acetate?

Hi, I am running a size exclusion chromatography experiment with a buffer containing Potassium Acetate as a salt. I analyse these fractions through SDS-PAGE. After boiling my SEC fractions in...

01 March 2021 2,622 3 View

How can I represent SDS-PAGE results for machine learning analysis?

I am trying to classify and analyze the results of an SDS-PAGE based array for bacterial detection using machine learning, but I have trouble finding the best way to represent the results with...

27 February 2021 9,176 3 View

Why my agarose gel staining sometimes looks not homogenic but like gradient (see the figure)?

I am worried about this overexposure of the upper part of the gel in the picture. Is it possible that this is the result of too much concentration of ethidium bromide? Why is there such a big...

25 February 2021 8,140 3 View

Why tick's salivary gland extract didn't run in the gel (SDS PAGE )??

Greetings, I want to make SDS PAGE for my sample (Tick salivery gland extract), I tried concentrations 10%, 12%. I also tried high molecular weight ladder. But the protein stopped at the top and...

25 February 2021 7,698 3 View

EMSA troubleshooting. Protein-DNA complex not migrating, cold probe lane with multiple bands. Can anyone help?

I'm running an EMSA to show the DNA binding activity of recombinant proteins versus the Wild type. Previous assays run by my research group using a different test system show the protein-DNA...

24 February 2021 8,325 1 View

Problem with ligating 2.8 kb insert into 8.5 kb plasmid?

I am trying to clone 2 copies of the same mammalian gene into the pSF-CMV-Ub-Puro Ascl (contains HindIII, KpnI and NheI cut sites) plasmid. This is what the final product is supposed to look like...

24 February 2021 6,310 3 View

How to manage western blot for proteomics data validation?

Hi Everyone, I am a bigginer in western blotting and I am trying to use it for validation of my proteomics data. I have: two regulated proteins with molecular mass of 40 and 73 kDa one control...

23 February 2021 6,671 4 View