What is the best method to deposit graphene on HfO2?

I want to deposit graphene on HfO2 deposit on GaAs/ Si substrate. What will be the best method to deposit?

03 April 2018 4,894 2 View

How can we choose which journals to choose for publication?

Impact factor is not the only metric that decides the effectiveness of the research publication? Sometimes public perception is good for some journal in spite of comparatively lower impact...

03 April 2018 4,959 2 View

How to deposit Graphene on HfO2 with good interface quality?

05 June 2017 3,581 3 View

Magnetic properties of HfO2

05 June 2017 8,226 3 View

How to etch HfO2 when it is deposited on graphene?

How to etch HfO2 when it is deposited on graphene?

03 April 2017 9,516 2 View

What is the difference between semiconductor and semi-metals?

What is the difference between semiconductor and semi-metals? Some materials are called semi-metals and some, semi conductors. then what is the difference?

07 August 2016 9,848 4 View

How to calculate optical band gap from UV spectra?

I have taken UV spectra of HfO2 thin film on Si wafer. How can I calculate optical band gap from this spectra?

03 April 2013 2,200 39 View

How to simultaneously perform multiple biochemical assays?

I am a research scholar working on heavy metal stress on plants. I will be doing biochemical characterisation( protein, carbohydrate, proline, antioxidant enzymes and many more assays) at interval...

01 March 2021 6,999 3 View

What are the new 2D nanomaterials were used for Silver nanoparticles stabilization?

In the stabilization of AgNPs are vital in current research interest. However, some of the 2D nano-materials like graphene oxide, MoS2, etc... previously used to stabilize it. But still they shown...

01 March 2021 2,207 3 View

Why is NH4OH added in heavy metals limit test?

The limit test I'm referring to is USP method II. In this procedure you need to dropwise add 6N of NH4OH to the sample until it the pH is alkali. After that you need to dilute and add HOAc until...

23 February 2021 2,049 3 View

Is this the write procedure for acid digestion of soil for heavy metal analysis using AAS?

How to do acid digestion of soil sample with 3:1 aquaregia in an open vessel?

23 February 2021 3,053 7 View

Thermal reduction of graphene oxide.?

I am trying to reduce graphene oxide by thermally but I have no proper information regarding this. Can any one help me regarding the details about temperature and time for the reduction of...

23 February 2021 4,155 4 View

Is there an ideal incubation time of RGO-modified SPCE before subsequent use, i.e., electrochemical characterization or further modification?

I notice that upon washing and air-drying of my RGO/SPCE surface and characterizing again via DPV, the current response towards ferricyanide probe significantly decreases. My worry is that the...

22 February 2021 5,324 3 View

I want to simulate a system containing protein and heavy metals; which force field is most reliable for this purpose?

The protein I want to simulate has multiple heavy metals. I wanted to know which force-field I should use with GROMACS to achieve this. Most importantly, do the latest updates in the force-field...

16 February 2021 2,420 1 View

What is the best substrate for exfoliating few layers of hexagonal boron nitride (hBN) using traditional scotch tape method?

Unlike graphene, it is usually very difficult to exfoliate few layers (~10 nm thick) of hBN on SiO2 substrate due to lip-lip interaction at the edges. Au substrates have been proven very useful...

16 February 2021 2,635 2 View

What can be use to mop up heavy metals from vegetables or soils in quarry mining site?

It has been established that quarry mining site polluted and contaminated it's environment with heavy metals, these affects the crops and vegetables planted in the area. The possible solutions to...

12 February 2021 1,155 5 View

How can I calculate teh crystallinity degree of graphene oxide?

I had treat my XRD diffraction pattern by Highscore to calculate the crystallinity degree Xc and I have the formula but I dont no the 2Theta of Ac and Aa to calculate Xc. Is it like polymers...

10 February 2021 6,305 5 View