Has anyone used an inertial navigation system with RTK (Real Time Kinematic)?

INS-RTK modules claim to be close to a cm accuracy, has anyone used one and if so, how expensive can the telematic charges be if I have a case to run it 18h per day?

14 December 2020 6,139 8 View

What are first, second and third cracks (red, green&blue color outline) in crack pattern of RC beams in ANSYS APDL?

Hello everyone, Can anyone kindly explain what is mean by three different colours of cracks in RC beams in ANSYS APDL and the features of first crack (red colour outline) second crack (green...

17 November 2020 2,512 1 View

What should be reason for higher values of Ultimate results for RC beam simulations in ANSYS APDL?

My RC beams experimental ultimate load & deflection was 97kN and 20mm resp. But when I model it in ansys apdl it run continuously up to a load of 140kN and 60mm deflection and still...

02 October 2020 8,747 2 View

Why the solution runs continuously even after reaching ultimate strength of beam in ANSYS APDL?

I am analyzing RC beam in APDL and tried convergence criteria with F=0.05 once then U=0.05 and also tried both criterias simultaneously but what I found is my solution continuous even upto twice...

02 October 2020 1,490 2 View

Need "E.Hognestad;" compressive stress-strain curve explanation?

Can anyone kindly explain in case of Hognestad compressive stress-strain curve for concrete, they have given fc" =0.85fc', but why researchers are use fc"=fc' instead. Where fc" =ultimate...

14 August 2020 7,508 3 View

How to perform Molecular dynamics (MD) simulation for corrosion system ?

Dear researchers, Greetings! Please help me to study surface of Fe(110) with Organic Corrosion inhibitor molecules using Materials Studio software. Kindly give suggestion to create a simulation...

02 August 2020 4,267 2 View

What characterization method is used for realizing different phases in a micron size particle?

12 March 2020 6,331 14 View

Which Fuzzification Technique for Ordinal Dataset ?

I have an ordinal dataset on the scale of 1 to 5 based on household surveys about the intensity of agreement (5 being strongly agreed to 1 being strongly disagreed) of residents about certain...

11 March 2020 6,308 2 View

No title

28 August 2019 2,091 6 View

How to check stress in main steel at first crack, yield load and ultimate load in ANSYS APDL?

good morning everyone, i need your help once again, As i am analysing RCC Simply supported beam in ANSYS APDL. i run the model upto ultimate failure, now i want to check the stresses in steel bars...

12 June 2019 7,168 3 View

Does anyone know an alternative product for cardiac Troponin T antibody for Immunofluorescence (Thermo # MA512960)?

We have been using Thermo Fisher anti-cardiac Troponin T antibody for immunofluorescence staining in FFPE mouse heart sections but it was recently discontinued. The literature shows it to be the...

01 March 2021 4,937 1 View

How to evaluate unsupervised clustering metrics when some elements do not have a cluster label in the result?

I run algorithms like HDBSCAN and MeanShift, and compare them with K-means and GaussianMixture. The first two algorithms do not return cluster labels for some elements in the dataset. My question...

27 February 2021 428 3 View

How should I analyze the multiple scans in Malvern Zetasizer software?

Hello, I am currently using the Malvern Zetasizer software for the purpose of obtaining the size distribution of nanoparticles produced in the lab. When I perform the runs in the software to get...

15 February 2021 4,251 1 View

Despite single-cell RNA, how can I characterize a new cell subtype/phenotype?

A new cell subtype was found out only during regeneration phases after a cuprizone-induced demyelination model. How can I characterize this cell? It is important to highlight that was already...

13 February 2021 1,245 1 View

Which optimization algorithm is most efficient for fitting a regression model using training dataset?

The goal of regression model is either to minimize the prediction error or to maximize a classification accuracy depending on the type of the model. Is there any optimization algorithm that is...

10 February 2021 4,128 3 View

Hello .Ineed a researchs about systolic heart failure any one can help me ?

Am a master student .I need an information about this case to write my thesis?

09 February 2021 9,706 2 View

Why does the accuracy of NN decreases when two datasets are combined?

I am working on gait analysis using a feed-forward NN. When I use data from the accelerometer (3 columns for each axis if stored in a data frame), I get an accuracy of 95%, and when I used data...

07 February 2021 9,654 6 View

Does diseases like fungal,bacterial etc of rice plant is different from nutrient deficiency diseases?how deep learning is used except classification?

can any one suggest me other than classification, how deep learning technique can be used in plant disease detection in rice plant? could a research work continued from fungal,bacterial...

07 February 2021 470 2 View

How to obtain confidence intervals in Amos?

Dear all, I would like to know your opinion on the following issue I am struggling with. I am estimating a multigroup model with several factors all correlated among them (they represent...

04 February 2021 1,381 4 View

Which ethical metrics is expected from an academic who is the owner or the creator of the measuring instrument?

Which ethical metrics is expected from an academic who is the owner or the creator of the instrument? The measurement tool will be applied to adults as an online form and a snowball sample will...

01 February 2021 9,188 3 View