Which is the accurate experiment to check solubility of active species in an organic solvent (Acetonitrile)?
I know that Zinc Iodide and Zinc Bromide has good solutbility in water but I am working on Non-Aqeous systems. So, kindly share if anyone used these chemicals with acetonitrile.
01 February 2018 631 4 View
I have the data of my CV and I can plot it. But I want to know if any software can help me in analysis of peaks.
09 October 2017 4,586 0 View
Which material of the tubing is suitable for organic solvents (like Acetonitrile, DMSO, 1,3 Dioxalene) while working with peristaltic pumps?
01 January 1970 9,559 4 View
I am working on redox flow battery using non-aqueous solvents and currently in the membrane selection phase.
01 January 1970 3,682 3 View
I need an experimental device to check solubility of active species in solvent. It is done to synthesise electrolyte.
01 January 1970 9,031 4 View
My electrodes should facilitate a good wettability (degree of wetting which is the ability of a liquid to maintain contact with a solid surface). But, how to measure it experimentally?
01 January 1970 8,059 3 View
Most of the literature is related to use of Metal Acetylacetonate as redox species for NARFB. Is there any particular reason other than solubility?
01 January 1970 577 2 View
I want to identify cycling voltages for my non-aqueous redox flow cell. Does Cyclic voltametery can help me to get the charging-discharging voltages of my redox cell.
01 January 1970 287 3 View
My objective is to scale down the size of existing redox flow-cell. I can get experimental data of spectro-photometery & conductivity meter for flow pattern of redox flow cell. Using this...
01 January 1970 4,227 0 View
Approximate concentrations are require in compared with the WHO permissible limts
11 August 2024 2,723 1 View
Hey there, As a synthetic chemist delving into theoretical calculations for my imidazolium-based organic molecules, I would greatly appreciate any guidance on the appropriate input instructions...
09 August 2024 5,444 7 View
I need to do some experiment with it in liquid form.
07 August 2024 613 3 View
Hello What should be done to separate and identify organic acids in HPC when their RetTime is the same?Like oxalic acid with Propanoic Acid.or acids that have a very close RetTime.
07 August 2024 8,782 3 View
..
05 August 2024 4,407 0 View
I work on MCF7 cell cell for anticaner purpose and I wa to do drug preperation the drug ( secondary metabolites extracted from Aspergillus) My question which solvent is better with these secodary...
03 August 2024 4,725 2 View
I used humic acid at 0.044 g/kg soil in my pot experiment. But finally, I have to recommend kg/ha. Each pot's soil weight was 11 kg. What is the solution?
02 August 2024 7,186 6 View
Hello everyone, I need to dissolve stigmasterol for an animal experiment, but it hasn't dissolved in either DMSO or vegetable oil. Can anyone recommend the best solvent for stigmasterol?
01 August 2024 7,504 2 View
Hi everyone, I'd like to better separate two close peaks coming from a bioconversion sample, I'm currently using a C18 KromaPhase 4,6mm Ø.I. SCHARLAU, particle size (µm): 10, pore size (Å): 100,...
30 July 2024 435 3 View
Hello everyone, I am try to understand the differences interaction between insoluble and soluble polymers in water with metal ions and how theit charge density (of metal ions) affect the interaction.
29 July 2024 6,350 3 View