Is the specific heat of solids pressure dependent?

In metals we can assume that Cp=Cv. Are the Cp or Cv of solids highly pressure-dependent? If so do they decrease or increase with applied pressure? Thanks,

11 December 2017 7,232 1 View

How do I calculate an inverse pole figure?

I am trying to calculate the Inverse Pole Figure of a rolled sheet with BCC-like crystal structure. However, when I perform a tetha/2tetha scan I can only see 2 diffraction peaks (see attached...

31 December 2015 2,819 1 View

Measuring inverse pole figure from two pole figures

Does anybody know how I can measure inverse pole figure from only 2 pole figures? According to standard technique in our XRD machine we need first 3 pole figures. Unfortunately, my material only...

04 May 2013 2,782 5 View

Physics: Why do we describe light by referring to its wavelength, but microwaves and radar pulses by referring to their frequency?

In physics, the description of the properties of light generally refers to its wavelength (nm), while in the range of microwaves and radio waves we refer to the frequency of a signal (e.g. kHz or...

03 March 2021 1,682 3 View

Why are the velocities so high in my Boussinesq approximation Fluent simulation?

Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...

02 March 2021 4,910 3 View

Why almost every element would be metallized in sufficiently high pressure and low temperature?

(This statement is from wikipedia, BTW). What is so special about metallic bond that is limiting high-P low-T state of a matter (as long as individual atoms exist, not white dwarf of neutron star...

02 March 2021 3,309 2 View

What does Servant Leadership mean today and in the future? What are the advantages and disadvantages?

In current time of many changes in business and world of work, a lot is said and reported about the importance, skills and benefits of leadership. Are soft skills becoming more and more important?...

02 March 2021 8,149 3 View

Ester cleavage conditions?

Hi all, I need to cleave the ester in Ethyl 2-amino-1H-imidazole-5-carboxylate to make the carboxylic acid and retrieve the product from solution to use in downstream applications of linking to...

01 March 2021 8,766 3 View

What is the density for pva electrospining?

I'm Juan Carlos, a high school student who is working with electropinning, I made an electropinning machine with a 21g needle and a 30kv high voltage source and the distance between my needle is...

28 February 2021 298 3 View

1 nm thick MgO thin-film to be deposited on Si wafer using thermal evaporation. What will be the optimum deposition conditions?

Favourable conditions of base pressure, rate of deposition. Also, by which characterisation technique to be used to verify the thickness of the deposited film.

28 February 2021 3,640 3 View

Should we reduce the standard unit of length to 0.31951540592 meter ?

The reasoning behind this question is to align the ratios of the proton potential in energy per charge to the speed of light in distance per time. As these two dimensions appear to be related,...

27 February 2021 947 7 View

How do you mesh a thin solid in Fluent?

Hello, I have used the shell function on SpaceClaim to create thin solids for the model I am studying. These are contained within an enclosure for my study. I chose this approach as it avoids the...

24 February 2021 8,856 3 View

How to prepare a thin polymer film by post-polymerization/crosslinking?

24 February 2021 2,362 5 View