How can we select the proper type of filter (low pass-high pass etc), frequency and filter order (n=2,3 etc) for cutting force analysis in milling?
I am using Dynoware software for Kistlerdynamometer which has a auto-filter mechanism but you need to select type of the filter, frequency etc.
You can see how it looks like in the software.
As a basic, you may use Butterworth Filter e.g., https://au.mathworks.com/help/signal/ref/butter.html and a bit advance is Kalman Filter https://au.mathworks.com/help/control/ug/kalman-filtering.html
Particle Filter: https://au.mathworks.com/help/control/ref/particlefilter.html and a Grassmannian Filter : https://au.mathworks.com/matlabcentral/fileexchange/72221-grassmannian-codebook-using-modified-lbg-algorithm
Muhammad Ali Thank you for sharing this. Altough this articles are fine I actually wanted to know how can I select/find the cut-off frequency, order number etc. Actually as I mentioned in the question the software gives the Butterworth as default, the question is about how can we choose the right values.
- Badges
- Science topic
- Similar topics
- Control Systems Engineering
- Filtering