The best thermal imagers in zoological research for detecting small mammals in soil?

What are the best thermal imagers to use in the study of insectivores, rodents and carnivorous mammals in soil horizons? The ability to detect herpetocomplex with a thermal imager in natural shelters?

17 November 2020 346 5 View

The best portable recorders for studying temperature changes in snowpacks?

What are the best loggers for obtaining changes in snow cover temperature at different depths with changes in air temperature? What are the long-term data loggers without recharging? What loggers...

17 November 2020 5,319 5 View

I want to use a Dialetric resonator antenna to measure magnetic fields, but how can I reduce the ambient noise from the environment?

I'm working on a project to do sense magnetic fields in 100 nano tesla range, and I don't know how we could reduce ambient noise without shielding. - Artificial magnetic fields could be one way...

03 July 2019 8,808 3 View

How to export chromatograms and spectra from diode array detector data?

The DAD data are collected into a .run file during an HPLC run followed by a Varian Prostar 335 detector. The file cannot be merely opened via a notepad and the question is how to extract all the...

04 April 2019 9,649 3 View

Is it possible to clean the resin from a Pierce Detergent Removal spin column?

I purchased these spin columns from ThermoFisher. When I contacted the company they told me that they never invastigated the possibility for its reuse. Has anyone ever attempted to clean the...

15 September 2016 7,413 1 View

Why can a protein elute from a SEC column (@150 mM NaCl) later than expected for its monomer?

Theoretical mass is 25 kDa, SDS-PAGE shows 26 kDa, no presence of degradation products. The SEC profile shows the major, very symmetrical peak at ~20 kDa. Why could this be? Unspecific interaction...

28 August 2016 2,007 16 View

Why do we need a "Smart Robot" to be used for recipes development and controlling performance?

We are discussing here intensive quenching processes: IQ-2 and IQ-3 technologies. The IQ-2 technology requires the duration of transient nucleate boiling process evaluation during batch quenching....

07 July 2015 6,143 5 View

What are the main differences between steady - state and transient nucleate boiling processes?

I'm wondering whether we can use heat transfer coefficients (HTCs) received for steady - state nucleate boiling condition to calculate temperature fields in steel parts during transient nucleate...

28 January 2015 1,475 11 View

Why engineers instead of real HTCs use effective HTCs during boiling?

17 December 2014 7,955 4 View

What is the original/up-to-date technique used for intensifying quenching of machine components based on transient nucleate boiling processes?

In metallurgy the effective heat transfer coefficients (HTCs) of transient nucleate boiling processes are used which are ten times less as compared with the real HTCs. The original technique for...

11 October 2014 2,050 2 View

What's the best way to measure growth rates in House sparrow chicks from day 2 to day 10?

What's the best way to measure growth rates in House sparrow chicks from day 2 to day 10? Since, the growth curve from day 2 to 10 won't be like the "Logistic curve" it might not follow logistic...

03 March 2021 1,401 3 View

After a reference from Int J Body Compos Res, can any body help?

Hi, I am after the reference below, my library says it cannot obtain a copy either locally or internationally, any help appreciated! Chris Wang ZM, Heshka S, Wielopolski L, Pi-Sunyer FX, Pierson...

03 March 2021 6,193 1 View

What techniques can I use to determine the miscibility of polymer blends?

The term miscibility refers to the single-phase state in thermodynamics. I do not mean the compatibility of different components. To determine the miscibility I know several techniques such as...

03 March 2021 4,107 4 View

How to repeat an operation on an atom selection for multiple times in PyMol?

Hi, I am trying to construct a multi-layer fibril structure from a single layer in PyMol by translating the layer along the fibril axis. For now, I am able to use the Translate command in PyMol...

02 March 2021 4,569 4 View

Shall I skip the measurement model in SmartPLS?

Hello everyone, I had run a mediation model in SmartPLS using questionnaires that were already validated among my statistical population. A professor who edited my paper -though she is not...

01 March 2021 3,052 3 View

What is involved in morphological changes of SEM images of a substance?

In the sem analysis of CaCO3 nanaoparticles, the morphology images showed spherical shaped particles but the proposed morphology for these type of nanoparticles is trigonal. I prepared the...

01 March 2021 1,960 4 View

I have designed reflectarray element and feeding it though Horn Antenna on HFSS. After full wave simulation, I am not getting desired results?

I have designed reflectarray element to generate OAM beams at 5.8GHz and feeding it though Horn Antenna on HFSS. After full wave simulation, i am not getting desired results i.e Radiation pattern...

01 March 2021 9,701 5 View

Joint behaviour in Abaqus is not captured well?

I am working on roof joint and trying to simulate the behaviour in Abaqus. I am successful in running the model but the final graph does not follow the experimental curve in the negative direction...

01 March 2021 6,661 3 View

Timeout error!! Processor in the loop (PIL) using STM32F4 Matlab 2018a?

Dear Researchers I am trying to perform a PIL simulation using STM32F4 Discovery board and comunication serial USB TO TTL. During simulation I receive the following timeout error: An error...

01 March 2021 2,327 1 View

How to define tie constraint between rigid body and another part in dynamic explicit model of Abaqus?

Hi dear researchers I connected a rigid body into the part of my structure by tie constraint and then I added displacement to rigid body, in static general step every thing is fine and these two...

28 February 2021 3,442 2 View