The best thermal imagers in zoological research for detecting small mammals in soil?

What are the best thermal imagers to use in the study of insectivores, rodents and carnivorous mammals in soil horizons? The ability to detect herpetocomplex with a thermal imager in natural shelters?

17 November 2020 346 5 View

Suitable channel model and beamforming technique for high band 5G?

Hello everyone, I want to simulate traffic in MATLAB between a multiple antenna base station and a single antenna user for mm-wave frequency of 28GHz. What is the most suitable channel model for...

20 March 2020 8,156 4 View

I want to use a Dialetric resonator antenna to measure magnetic fields, but how can I reduce the ambient noise from the environment?

I'm working on a project to do sense magnetic fields in 100 nano tesla range, and I don't know how we could reduce ambient noise without shielding. - Artificial magnetic fields could be one way...

03 July 2019 8,808 3 View

How to export chromatograms and spectra from diode array detector data?

The DAD data are collected into a .run file during an HPLC run followed by a Varian Prostar 335 detector. The file cannot be merely opened via a notepad and the question is how to extract all the...

04 April 2019 9,649 3 View

Why can a protein elute from a SEC column (@150 mM NaCl) later than expected for its monomer?

Theoretical mass is 25 kDa, SDS-PAGE shows 26 kDa, no presence of degradation products. The SEC profile shows the major, very symmetrical peak at ~20 kDa. Why could this be? Unspecific interaction...

28 August 2016 2,007 16 View

Why do we need a "Smart Robot" to be used for recipes development and controlling performance?

We are discussing here intensive quenching processes: IQ-2 and IQ-3 technologies. The IQ-2 technology requires the duration of transient nucleate boiling process evaluation during batch quenching....

07 July 2015 6,143 5 View

What are the main differences between steady - state and transient nucleate boiling processes?

I'm wondering whether we can use heat transfer coefficients (HTCs) received for steady - state nucleate boiling condition to calculate temperature fields in steel parts during transient nucleate...

28 January 2015 1,475 11 View

Why engineers instead of real HTCs use effective HTCs during boiling?

17 December 2014 7,955 4 View

What is the original/up-to-date technique used for intensifying quenching of machine components based on transient nucleate boiling processes?

In metallurgy the effective heat transfer coefficients (HTCs) of transient nucleate boiling processes are used which are ten times less as compared with the real HTCs. The original technique for...

11 October 2014 2,050 2 View

Who is interested to investigate further the self - regulated thermal process and the super- strengthening phenomenon?

During the self- regulated thermal process, the surface temperature of quenched steel parts maintains at the level of boiling point of liquid. That can be used to monitor phase transformation in...

13 February 2014 652 3 View

Why are the velocities so high in my Boussinesq approximation Fluent simulation?

Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...

02 March 2021 4,910 3 View

Why do the air flow results vary totally when adding scalar in CFD ?

Dear All, We are using Autodesk cfd to calculate the air flow in a single sided naturally ventilated room, where air flow depends only on buoyancy due to temperature difference between inside and...

25 February 2021 9,602 4 View

Is is possible to pole with corona poling pellets of the sample material instead of thin films?

As it is highly probable that pellets will have a higher degree of air gaps and voids than thin films, is it possible to pole the samples with corona poling nevertheless? Or is there the...

24 February 2021 1,349 1 View

Have you ever experiencing air vent trouble in fermentation process?

Dear all, My research group is currently working with a 12-litre fermenter. Somehow, if we do the fermentation for more than 20 hours, the process will be more prone to contamination. Our current...

23 February 2021 1,908 2 View

Help with assigning pressure boundary conditions in FLUENT on a large structure?

Hello, I created a very tall tower (>1000m) and applied pressure boundary conditions at the inlet (bottom) and outlet (top) that correspond to the pressure are their relative altitudes....

22 February 2021 9,972 4 View

Literature on snowflake aggregation?

I am looking for literature suggestions on the topic of snow aggregation. My main interest is on the aggregation process itself (rather than papers describing aggregate snowflakes characteristics)...

19 February 2021 2,197 3 View

What type of pressure sensor are usually used in microfluidics?

My team is designing a dual channel microfluidic chip that runs air and water. I think we've decided on the NE1000 syringe pump for it's versatility and feedback control. We will be ordering the...

18 February 2021 9,928 2 View

Not able to charge-discharge Li-ion coin cell at higher C rate ?

I am working on cathode material. I have made different Li-ion coin cell against Li metal using commercial available cathode materials such as LCO,LMO, LFP and NMC and also with the lab...

18 February 2021 1,450 3 View

How to find the air side pressure drop in a spiral fin tube bundle cross flow heat exchanger?

How to find the air side pressure drop in a spiral fin cross flow heat exchanger? The pressure difference at the inlet and outlet is very low compared to the experimental results, which I...

18 February 2021 1,109 2 View

Is it correct to identify an air mouvement by the Venturi effect in buildings ?

Knowing that the Venturi effect is used most in tubes (according to my basic knowledge in physics) to increase the speed of air or liquids by reducing the tube volume, my question is if we have...

17 February 2021 1,260 1 View