Hello, We are users of the SQ24 nitrogen generator manufactured by PEAK. The problem is that the compressor is working (since August) continuously, throwing out excess pressure - it reaches 142 psi, opens the valve and the pressure drops rapidly to about 70 psi and so on. It is strange as it has built-in compressed air tank. In one hour, the compressor only turned off 2 times for approx. 60 seconds. It is working for 95-99% of the time. Before, for a year, we did not notice this kind of behavior. It was working logically - after reaching the appropriate pressure in its tank, the compressor was turning off and starting when pressure was low. It was working more like 10-20% of the time. From our side nothing happened, our use it the same. Is this the correct operation? Can you provide info on your operation please?