Partially Pre-mixed combustion of methane and air in constant volume combustion chamber simulation with fluent FGM model?

08 March 2021 0 10K Report

I am carrying out a two-point numerical simulation of Methane-air mixture in a constant volume combustion chamber using Flamelet generated model (FGM)using ANSYS Fluent software. But I have stuck in importing the Chemkin file for Methane-air mixture in the FGM Flamelet model. So can you please help me from where I can get the methane-air mixture file?

Thank you.

Badges
Science topic

More Prashant Patane's questions See All

What is the maximum value of Divesity Gian in MIMO? For two antenna system its 10dB. As no. of antennna increse diversity gain increase or decrease?

Somewhere on the internet, it's reported the maximum diversity gain limit theoretically can be achieved is 10dB. Some papers said it increases with more antennae and some said it will decrease.

09 June 2024 5,121 2 View

Fully funded phd ?

any fully funded phd position in wildlife ?

25 May 2024 7,976 2 View

Access to document containing CPCB calibration curve and uncertainty for PM2.5, SO2, O3, and NO2 monitors?

I am wondering if anyone has come across calibration curve and uncertainty for PM2.5, SO2, O3, and NO2 monitors maintained and operated by the CPCB? Please share link herein for the same if you...

25 April 2024 7,164 5 View

How to model or program a cascade refrigeration system using natural refrigerants on MATLAB ?

What are different ways of modelling and simulation of cascade refrigeration cycleusing natural refrigerants on MATLAB without using simscape ? How to write program for it and connect MATLAB...

02 April 2024 487 2 View

Classical text is important or research journals are important?

because people are citing/talking less about Classical texts discovered by Rishi/sages. Rishi has the broad scientific knowledge as per their practical and theoretical practices.

30 March 2024 2,013 0 View

How to interpret the LCMS data with using peak values?

How to evaluate the compounds with usage of peaks and their respective values in LCMS - TOF instrumentation? Is there any web portals for the data interpretation? I Have got Both LC (2 Files) MS...

13 March 2024 7,940 1 View

Understanding factors leading shift from spiritual-cultural drinking to modern alcohol consupmtion in Warli tribe?

Alcohol consumption shift. Socio-econo-cultural factors, globalisation, westernisation, religious conversion role in alcohol consumption shift

12 September 2023 4,757 0 View

How fin and fan design is done for for thermoelectric refrigeration system ?

I have not understood here the method of design of fin and Fan for thermoelectric refrigeration system in paper attached .....................

09 August 2023 8,355 0 View

What best method to obtain correct composition of Al2024 series ? OES or EPMA?Steps?

I have tried OES method to obtain composition of 2024 T4 multiple times. As per standard composition Cu should vary between 3.8-4.9 and Mg should vary between 1.2-1.9. The problem coming is that...

18 July 2023 450 0 View

Are D16AT and 2024-T4 same ??

In all research paper i found the Aluminium alloy D16AT and 2024T4 having same chemical composition . They are subjected to same heat treatment process. Are they different or same ???

16 July 2023 8,039 4 View

How to define an anisotropic material with asymmetric elastic compliance/stiffness matrix in ANSYS APDL?

I need to model an anisotropic material in which the Poisson's ratio ν_12 ≠ ν_21 and so on. Therefore, the elastic compliance matrix wouldn't be a symmetric one. In ANSYS APDL, for TB,ANEL...

09 August 2024 5,048 2 View

Question about combustion Kinetics ?

I am currently working on modeling FCC catalyst regeneration and have come across a point of uncertainty that I hope you can assist me with. In my previous models, I have utilized lumped kinetics...

30 July 2024 6,137 0 View

Tangential stiffness option in ansys workbench?

I am not able to find how I can provide tangential stiffness in ansys workbench The normal stiffness option is there. But how I can enter tangential stiffness I have read somewhere tangential...

29 July 2024 2,032 2 View

How to Import Blade geometry from CAD file in ANSYS design modeler?

Hello. I have the geometry of a blade in CAD file (stp) and I want to prepare the blade for meshing with turboGrid. I must import this file into designModeler and then transfer to the...

27 July 2024 356 3 View

Problem with Two-phase simulation?

Hello; I am conducting a CFD study on two-phase flow in a separator, utilizing refrigerant as the working fluid. For this study, I have implemented pressure inlet and pressure outlet boundary...

25 July 2024 2,309 5 View

Why my simulation results are showing too much deformation compared to experimental result?

I performed fea on tensile dog bone specimen using ANSYS static structural and also tried using ANSYS explicit dynamics. In experimental result the load is 500 N and deformation is 0.6 mm...

13 July 2024 3,631 4 View

How to introduce on fluent the optical loss of the wall due to the reflection of the plate towards the environment ?

"When solar irradiation reaches a surface, some of it is absorbed while the rest is reflected. Part of the light absorbed by the surface transforms into heat and increases the module's...

13 July 2024 8,621 5 View

Can I transfer the 3D file from Matlab to Ansys or Abaqus?

I have a 3D output in the figure section of Matlab, does anyone know a way to transfer it to Abaqus or Ansys? Or in what format should I save it so that these analysis software can analyze it?

09 July 2024 9,226 3 View

How to add a mass source term in the continuity equation?

Hi, I am trying to model laser cladding in Ansys FLUENT. There are two phase: one is base metal surrounded by an inert gas (shown in the image). I want to add a cladding layer of the same metal....

07 July 2024 1,182 8 View

Why i can't get access to isosurface in fluent?

hello everyone i get into fuent and i select the result icone then i try to create an isosurface but the button is gray so i can't choose it. what's the problem? any suggestion.

03 July 2024 5,418 4 View