I have this problem when i take geometry in fluent .Model Information is incompatible with incoming mesh. How to resolve it?
Use this forum. Good luck :)
https://www.cfd-online.com/
thanks Ali and Zoubair for your answers
Right click 'Setup' and press reset. This will force you to start everything after the updated mesh from scratch. Don't bother looking for the error.
i have the same problem
I examined a compound containing lithium ions, and it did not appear in the EDX examination
08 June 2024 1,901 5 View
I am producing lentivirus for my masters thesis and I do not have access to an ultracentrifuge- I have been looking for a protocol to concentrate my samples using the PEG method but there is many...
17 March 2024 2,188 2 View
What is the name of the program to calculate attenuation for gamma sources - shielding - thickness?
21 October 2023 1,838 0 View
How can we calculate radon concentration in homes using Cr39?
20 October 2023 4,165 5 View
What is the best polymeric material from which an alpha particle radiation detector can be made?
09 October 2023 6,868 3 View
How can the concentration of thoron gas be calculated in the Cr 39 detector?
09 October 2023 1,027 1 View
Is it permissible for a widowed wife to use the sperm of her deceased husband, which was frozen while he was still alive? The question from a legal and ethical points of view
27 August 2023 5,043 0 View
Hi I would like to draw a Generic trapezoid shape using the "general_trpd" geometry. I have already implemented the following code to create a trapezoid shape: /gate/bunker/daughters/insert...
06 July 2023 1,586 0 View
criteria for student assessment
22 June 2023 4,159 2 View
My research group wants to freeze down some of our first passage of primary dermal fibroblasts incase we need to re-seed them at some point. Is it appropriate to store in complete growth media...
25 January 2023 1,207 1 View
I need to model an anisotropic material in which the Poisson's ratio ν_12 ≠ ν_21 and so on. Therefore, the elastic compliance matrix wouldn't be a symmetric one. In ANSYS APDL, for TB,ANEL...
09 August 2024 5,048 2 View
To compare positive and negative cell populations in flow cytometry, should I compare unstained cells with antibody stained cells? Or with the isotype control? Most papers show comparison with...
06 August 2024 6,728 6 View
Women, on the other hand, can become physically aroused (increased blood flow in the reproductive organs) without becoming psychologically aroused even in the slightest. (Robert Weiss)
05 August 2024 9,537 2 View
We have a lateral flow test on Sartorius 140 NC. The conjugate is gold-monoclonal antibody. Using different control lines (GAM, protein A, protein G) we get a very strong leading edge with reduced...
31 July 2024 4,510 3 View
Hello everyone, I am currently using washed human platelets to stain Annexin V as a procoagulant marker. Additionally, I am staining with PerCP-CD61 to identify platelet cells. So far, I have...
29 July 2024 8,624 1 View
I am not able to find how I can provide tangential stiffness in ansys workbench The normal stiffness option is there. But how I can enter tangential stiffness I have read somewhere tangential...
29 July 2024 2,032 2 View
I cannot confirm cell surface protein expression by flow cytometry even after transfection and antibiotic selection of cells. Does it take long for proteins to express on the cell surface? the...
28 July 2024 3,178 3 View
Hello. I have the geometry of a blade in CAD file (stp) and I want to prepare the blade for meshing with turboGrid. I must import this file into designModeler and then transfer to the...
27 July 2024 356 3 View
Hello; I am conducting a CFD study on two-phase flow in a separator, utilizing refrigerant as the working fluid. For this study, I have implemented pressure inlet and pressure outlet boundary...
25 July 2024 2,309 5 View
Hi everyone, I am working on a curved domain in which a ship is situated in the middle (geometry is given below). In my understanding the general fluid flow is parallel to the x axis from inlet to...
25 July 2024 9,058 4 View