In textile effluent which metal is found more lead or copper?

01 January 2016 1 2K Report

in textile effluent which metal is found more lead or copper ?

Hie renu ..

textile effluent mainly will have dyes . that can be reactive dyes or VAT dyes. in case of metals lead and cadmium found in textile effluent. which is harmfull for human being

Badges
Science topic

More Renu Bisht's questions See All

I have determined maximum wavelength of my dye wastewater. How to determine intial cocentration of dye wastewater and name of dye in it?

i have determined maximum wavelength of my dye wastewater. How to determine initial concentration of dye wastewater and name of dye in it?

05 June 2018 6,972 6 View

Kindly suggest few models which are best and simple for fixed bed column study?

08 September 2017 943 1 View

How to calculate external mass transfer coefficient for fixed bed column filled with the adsorbent pellets?

How to calculate external mass transfer coefficient for fixed bed column fiiled with the adsorbent pellets?

07 August 2017 9,319 3 View

How to contact googlescholar for wrong citation?

05 June 2017 3,126 7 View

How to calculate mass transfer coefficient and axial dispersion coefficient?

How to calculate mass transfer coefficient and axial dispersion coefficient. when only following parameters are known 1.Bed height 2.Flow rate 3. Inlet adsorbate conecntration 4. External mass...

05 June 2017 6,828 1 View

Does anyone have any experience with "Environmental Engineering and Management Journal" with ISSN 1582-9596 and IF - 1.008.

Does anyone have any experience with "Environmental Engineering and Management Journal" with ISSN 1582-9596 and IF - 1.008. On their website they instruct to mail your research paper directly on...

05 June 2017 8,645 0 View

Continous column adsorption capacity

If i am working on a column filled with adsorbent, in my batch study max adsorption capacity was achieved in 1 hr. In continous column how can i achieve that max adsorption capacity that was...

05 June 2017 4,398 7 View

In my model of matlab for fixed bed adsorption column, i have obtained very large time in X-axis of breakthrough curve?

In my model of matlab for fixed bed adsorption column, i have obtained very large time in X-axis of breakthrough curve..i.e nearly 5*10^(5) second. Is it possible? why it is higher. please suggest?

04 May 2017 1,547 4 View

How to measure adsorbent surface area?

I have used BET to determine surface area of my adsorbent (cellulosic material) but nitrogen does not adsorb on its surface. Only one point is available. Please suggest how can i measure its...

04 May 2017 6,423 3 View

How to make pellets of acid treated wheat bran . It is similar to activated carbon?

How to make pellets of acid treated wheat bran ? It is similar to activated carbon..we made pellets using pelletizer using clay as a binder..pellet is perfectly made but after dipping in water it...

03 April 2017 340 0 View

• What the possible Persistent Organic Pollutants and Heavy metals present in fluorspar, sediments, and water bodies around its mining area?

Approximate concentrations are require in compared with the WHO permissible limts

11 August 2024 2,723 1 View

Why do i have a weak plasma and no coating during rf sputtering?

I have been getting a low plasma and no coating while doing rf sputtering of copper doped ZnS using a power of 140 watts and at pressure of 6.5x10-3 Mb.

07 August 2024 4,526 4 View

How can I find access to heavy metal reference doses from the EPA and WHO websites?

Reference dose and Maximum acceptable concentrations HMs

03 August 2024 8,230 4 View

Addition of EDTA during the synthesis of copper nanoparticles to prevent it from being oxidized?

I've attempted to use this method to synthesize copper nanoparticles. Copper nanoparticles can be synthesised using a variety of precursor materials. CuSO4, distilled water, NaOH, and EDTA are...

28 July 2024 8,027 3 View

How can magnetic Biochar remove dye pollutants, is this technology beneficial?

The harmful Dye pollution from industrial processes such as textile generated how to remove with magnetic biochar ?

07 July 2024 8,118 1 View

How to conduct bio accessibility analysis of Heavy metals?

for estimation of human health risks

26 June 2024 7,326 3 View

Can anybody tell me how to find out the ionic concentration of influent (Ci) and effluent (Co) water?

I'm performing CDI experiments wherein to find deionization rate i need to know the ionic concentration of influent and effluent. Can anybody please explain how to find?

19 June 2024 5,572 12 View

Sorghum bicolor accumulates heavy metals?

If Sorghum bicolor is an accumulation of heavy metals, how are they used as fodder and food for animals?

17 June 2024 8,140 1 View

If silver is doped to copper indium sulphide during hydrothermal synthesis by repacing some amount of copper, what will be the size of nanoparticle ?

If I dope silver during the synthesis of copper indium sulphide nanoparticles by hydrothermal method what will be the size of nanoparticles?

13 June 2024 6,844 3 View

What is the size effect of this nanoparticle for flourescence sensing of heavy metals?

Hi, I am working on the flourescence sensing of heavy metal ions in aqeous media using chalcogenide nanoparticles. If I dope a metal ion into this nanoparticles by reducing the moles of already...

11 June 2024 5,568 2 View