How to make pellets of acid treated wheat bran ? It is similar to activated carbon..we made pellets using pelletizer using clay as a binder..pellet is perfectly made but after dipping in water it breaks with in a second?
i have determined maximum wavelength of my dye wastewater. How to determine initial concentration of dye wastewater and name of dye in it?
05 June 2018 6,849 6 View
Kindly suggest few models which are best and simple for fixed bed column study?
08 September 2017 827 1 View
How to calculate external mass transfer coefficient for fixed bed column fiiled with the adsorbent pellets?
07 August 2017 9,207 3 View
How to contact googlescholar for wrong citation?
05 June 2017 2,985 7 View
How to calculate mass transfer coefficient and axial dispersion coefficient. when only following parameters are known 1.Bed height 2.Flow rate 3. Inlet adsorbate conecntration 4. External mass...
05 June 2017 6,679 1 View
If i am working on a column filled with adsorbent, in my batch study max adsorption capacity was achieved in 1 hr. In continous column how can i achieve that max adsorption capacity that was...
05 June 2017 4,279 7 View
Does anyone have any experience with "Environmental Engineering and Management Journal" with ISSN 1582-9596 and IF - 1.008. On their website they instruct to mail your research paper directly on...
05 June 2017 8,527 0 View
In my model of matlab for fixed bed adsorption column, i have obtained very large time in X-axis of breakthrough curve..i.e nearly 5*10^(5) second. Is it possible? why it is higher. please suggest?
04 May 2017 1,314 4 View
I have used BET to determine surface area of my adsorbent (cellulosic material) but nitrogen does not adsorb on its surface. Only one point is available. Please suggest how can i measure its...
04 May 2017 6,204 3 View
How to wash and dry chitosan coated powdered adsorbent which is in form of a slurry ? It is in form of a gel, how to wash it and dry?
01 February 2017 8,984 2 View
How to calculate the RMSD values for a MD simulation using MOE?
07 August 2021 0 0 View
When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.
16 June 2021 0 0 View
effect of double bond on the flexibility of polymers
07 April 2021 0 0 View
I am writing to request some information for making polymer color flakes. I would appreciate the help.
17 March 2021 0 0 View
Hi, I want to start testing pitfall trap to obtain ants samples, but I need to conduct molecular analysis on those insects. So, what kind of fluid can I use? Ethanol expires too early and I need...
03 March 2021 5,978 5 View
I have selected brain tumor images ...but now found that already lots of research done n this topic.
03 March 2021 5,774 3 View