Any methods for quantification of Avicel content from samples?
Avicel is microcrystalline cellulose. Therefore not a candidate for HPLC. If there are no other solids you may extract the other components first and determining Avicel gravimetrically.
Dear researchers, I wish to understand the role of grain growth inhibitor in controlling the microstructure of the ceramic pellet. How it controls the growth? Also, I wish to know the grain...
15 January 2021 3,859 3 View
what are the invivo screening methods for anti TB drug?
25 December 2020 722 1 View
Hi all, I wish to know about a common problem faced by most of the researchers who are dealing with ceramic materials that my ceramic powder is sticking with the balls after the operation. can...
02 December 2020 8,232 3 View
I want to isolate components from leaf material, so I have beter solvets but suggest me method which will improve yield and purity
08 September 2020 1,003 2 View
my target to isolate alkaloids from plant leaves, as phytochemistry of plant reported for some alkaloid derivatives , so please guide me.
01 August 2020 7,376 15 View
This question is more in regard to the resonant structures used for sensing applications, namely surface plasmon resonance, photonic crystals and guided-mode resonance based devices, etc which all...
17 March 2020 6,800 3 View
I created a rolling model by using Abaqus/Explicit. All the warnings and errors, I corrected but still have a problem with one warning. The warning is about running the simulation in double...
25 March 2019 6,671 3 View
I am trying to isolate RNA and DNA from the tissue biopsy stored in Trizol at -80 degree for more than 6 months . I isolated RNA using the standard Trizol method and obtained good quality and...
22 November 2018 2,446 2 View
I have calculated 2 (-ddct) for a set of 6 genes in 5 tissues using GAPDH as reference and one of the tissues as the calibrator. However, after computing the 2 (-ddct) values, which I believe is...
21 August 2018 3,108 3 View
I want to quantify phenolics present in my aq. methanol extract using gc ms. But i want to make the extaract volatile so that it could separate out the phenolics. Please guide me to prepare my...
17 April 2018 6,145 4 View
03 March 2021 8,272 1 View
I have dataset which shows the length of power lines. I need to classify the lines based on the line length. Is there a rule to classify the High voltage (HV) and low voltage (LV) lines based on...
03 March 2021 4,116 4 View
I am using a 2707 waters HPLC device. When I try to inject a sample, it says missing plate or rack. I changed the needle and calibrated its position but I still get the same problem. I even get...
02 March 2021 1,408 1 View
(This statement is from wikipedia, BTW). What is so special about metallic bond that is limiting high-P low-T state of a matter (as long as individual atoms exist, not white dwarf of neutron star...
02 March 2021 3,309 2 View
Hello! I'll do a size exclusion chromatography, but I only have an open column, and I'll perform the peptide extraction from yeast, using buffer lysis (sodium phosphate 50 mM/NaCl 30 mM/DNAse and...
01 March 2021 2,215 2 View
I am going to have 3 different probes in my qPCR work that I am going to do. But I realized that the machine we have in the lab is a Rotor-Gene Q 2plex HRM Platform, saying it has green, yellow,...
01 March 2021 8,544 1 View
I have designed reflectarray element to generate OAM beams at 5.8GHz and feeding it though Horn Antenna on HFSS. After full wave simulation, i am not getting desired results i.e Radiation pattern...
01 March 2021 9,701 5 View
Hi, I am running a size exclusion chromatography experiment with a buffer containing Potassium Acetate as a salt. I analyse these fractions through SDS-PAGE. After boiling my SEC fractions in...
01 March 2021 2,622 3 View
I am doing my thesis on the nutrient deprivation on the macroalgae Rhizoclonium sp. I will be analysing the levels over a period of roughly 5 days by HPLC-UV and GC/MS. I will be using seawater as...
28 February 2021 6,477 1 View
I have designed a 24 GHz rectangular antenna on HFSS 3D model and got desired results while desing the same antenna with same dimensions I am getting resonance frequency at 27 GHz I am...
28 February 2021 4,426 2 View