Can we classify HV and LV lines based on line length?

I have dataset which shows the length of power lines. I need to classify the lines based on the line length. Is there a rule to classify the High voltage (HV) and low voltage (LV) lines based on...

03 March 2021 4,116 4 View

Why the results when using wall thickness and when using shell conduction are different in ansys fluent?

Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...

01 March 2021 9,537 2 View

How much pressure we can reduce at the outlet to avoid Reverse Flow?

I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...

01 March 2021 6,985 3 View

How to calculate the annealing temperature of a primer pair?

I have to amplify a gene and my primers just reached. The Tm for Forward primer is 64.2, and that of reverse primer is 65.5. Can some one suggest how to get the best annealing temperature? Thanks...

01 March 2021 360 7 View

What is recommended for solid domain in ANSYS FLUENT?

Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?

01 March 2021 9,785 3 View

Can Virtual Servers (remote dekstop manager) run heavy ANSYS Fluent CFD simulation ?

I have a virtual machine. My host Pc specs are not that good thats why i went for virtual servers. so basically my host pc has 8gb of ram with nvidia quadro k2200 4Gb DDR5 GPU ,processor intel...

01 March 2021 8,415 1 View

The reason that the culture of white fungi Contamination with green mold(Trichoderma), the culture autoclave at121 for 15 min. What is it?

Is the period to autoclave not enough? The inoculation in a hood and flame and UV and alcohol.

27 February 2021 9,356 3 View

How to include original NMR data in a manuscript?

hello. i am junior researcher. I received a comment from a reviewer that he could not find NMR data in my submitted paper. I had included the NMR graph with explanation and formula to calculate...

27 February 2021 734 4 View

Does different dilution factors affect negatively on NH3 reading ?

I have a sample of treated water sample & asked to obtain ammonia conc. in sample using a machine with 5-25 ppm detection range. However, upon testing with different dilution factors, all...

27 February 2021 8,483 3 View

What are the application of Fixed points thoery in Chemistry.?

It is said that fixed point theory has lot of applications not in the field of mathematics only but also in various areas. So I am looking for applications in Chemistry only..

26 February 2021 3,533 1 View

Which is the most ecofriendly and effective activated agent for the preparation of activated carbon from sewage sludge?

I am going to prepare activated carbon from the waste activated sludge coming out of WWTP. Can you please help me in understanding, which chemical/physical activating agent will be most...

07 February 2021 9,507 5 View

How can we draw the adsorption isotherms of Langmuir and Freundlich together with the experimental data in a single graph on Excel?

Thanks in advance

22 December 2020 7,853 4 View

Why in BET surface area becomes zero but when detag ads des, it shows good value around 150-200? For single crystals is it a good data to publish?

For single crystals can I give BET data in the publication if it is coming around 200. And why it shows zero value surface area but after detag ads or des it shows value, and which one I should...

02 December 2020 7,173 1 View

All the experimental results need to be presented with statistical analysis. In case of adsorption isotherm and kinetic study, what does I include?

What are the things should I include under statistical analysis.

19 November 2020 5,098 2 View

What is the effect of isothermal heat treatment on materials structure from room temperature?

Hi all I would like to study the microstructure evolution of semi-solid tin-lead alloy for an extruded sample during the isothermal heat-treatment process. Is there any difference if I heat up...

18 November 2020 9,087 7 View

Heat exchange due to humidity difference ?

Hello everyone. How can I simulate evaporative cooling between air and water (isothermal) placed in direct contact? Is it possible to choose or set the humidity difference as the heat exchange...

11 November 2020 5,225 3 View

What is the equation used in the calculation of surface area from BET plot?

I want to know the equation that I should use when I calculated the surface area using a plot like this one in the attachment. What are the parameters required for the calculation?

15 October 2020 8,364 6 View

Is K-silicate gel a porous material?

I coated a stone surface with K-siilcate. Apparently, it does noe seal the surface since the water penetrae the stone easily and the absorption coefficient does not change too much. However, the...

05 October 2020 3,435 5 View

Can we use Aluminum sheet as a substrate for thin film and have surface area calculated from BET?

I am to calculate surface area of a thin-film using BET and use the same thin-film for electrochemical analysis. I have chosen aluminum sheets, will there be any issues with BET??

27 September 2020 8,456 4 View

How can I determine the type of my membrane NF or UF?

20 September 2020 5,531 2 View