ended as Too many attempts made for this increment.
warnings as following：
For *tie pair (assembly_s_surf-11-assembly_m_surf-11), adjusted nodes with very small adjustments were not printed. Specify *preprint,model=yes for complete printout.
For *tie pair (assembly_s_surf-9-assembly_m_surf-9), adjusted nodes with very small adjustments were not printed. Specify *preprint,model=yes for complete printout.
Displacement increment for contact is too big.
Displacement increment for contact is too big.
Displacement increment for contact is too big.
The strain increment has exceeded fifty times the strain to cause first yield at 10 points
Displacement increment for contact is too big.
The strain increment has exceeded fifty times the strain to cause first yield at 192 points
The strain increment is so large that the program will not attempt the plasticity calculation at 17 points
Excessive distortion at a total of 162 integration points in solid (continuum) elements
Displacement increment for contact is too big.
Check boundary condition, meshing and interaction. These errors may be due to poor meshing and bad interaction properties.
- Badges
- Science topic