Editing material in WB
It always at the right top of engineering data. For ANSYS Workbench 15, the table of properties is at Row 9,. Here I attached my picture.
See in the first figure
I started creating new material and I added Alternating stress mean stress
In the right side top corner table of properties is there( ref untitled2)
In the table add a value and press enter then next row will come (ref untitled3)
in this way you can create table
If on right side top table of properties is not there (untitled4), then go to view and highlight table (untitled5)
then table of properties option(untitled6) will come
all the best
Use MP command.
18 December 2014 1,865 3 View
Meshing details
16 December 2014 293 2 View
I am conducting fatigue analysis using ANSYS WB. After running simulation once, I wanted to change the "Scope" details (the "Geometry" option in the "Scope") because I wanted to add one more body...
11 December 2014 502 2 View
Specifying young's modulus and poisson's ratio Thanks in advance!
11 December 2014 4,838 2 View
curve (or tabular data)
11 December 2014 1,425 3 View
11 December 2014 9,214 2 View
10 December 2014 3,457 1 View
09 December 2014 489 3 View
I specified a sinusoidal loading pattern to the geometry, using a function [x component of load= -45*cos(3600*time)-110]. I want to see after how much time it will fail/deform. The...
07 December 2014 6,790 11 View
I need to model an anisotropic material in which the Poisson's ratio ν_12 ≠ ν_21 and so on. Therefore, the elastic compliance matrix wouldn't be a symmetric one. In ANSYS APDL, for TB,ANEL...
09 August 2024 5,048 2 View
I am not able to find how I can provide tangential stiffness in ansys workbench The normal stiffness option is there. But how I can enter tangential stiffness I have read somewhere tangential...
29 July 2024 2,032 2 View
Hello. I have the geometry of a blade in CAD file (stp) and I want to prepare the blade for meshing with turboGrid. I must import this file into designModeler and then transfer to the...
27 July 2024 356 3 View
I performed fea on tensile dog bone specimen using ANSYS static structural and also tried using ANSYS explicit dynamics. In experimental result the load is 500 N and deformation is 0.6 mm...
13 July 2024 3,631 4 View
I have a 3D output in the figure section of Matlab, does anyone know a way to transfer it to Abaqus or Ansys? Or in what format should I save it so that these analysis software can analyze it?
09 July 2024 9,226 3 View
Regarding the system coupling issue where the update of the solution component fails, the system coupling update for fluid flow (Fluent) triggered an exception: "Update Solution Failed."
30 June 2024 7,894 1 View
Hi everyone, I want to import an STL geometry (surface meshed with 2D meshes) into ANSYS APDL. After importing, I also want to mesh the structure with SOLID187 elements to convert it into a solid...
25 June 2024 4,286 4 View
I am trying the simulate the drum brake squeal in ansys. For giving the rotational velocity to drum what should i use the Rotational velocity or CMROTATE command.
24 June 2024 5,125 0 View
I need to get the eigenvalues after a modal analysis in ansys workbench. Is there any next APDL command that will get the required result.
20 June 2024 1,668 0 View
Hello all, I've compiled a udf which reads velocity data with corresponding time stamp from a .csv file using DEFINE_ON_DEMAND macro. Then, I use DEFINE_PROFILE to define an inlet velocity profile...
14 June 2024 6,480 0 View