I need XRd paterrn (JCPDS card No.) for analysis of graphite, graphene oxide, reduced graphene oxide? Please provide me, if anyone have these.
I couldn't find any JCPDS card number for graphene oxid. In the case of rGO, scientific resources (e.g the book chapter in attachment) reference 75-2078 card number and for graphite I suggest you take a look at the attached file labeled 75-1621.
When I deposit graphene oxide on fto coated glass with quantity 0.25mg 0.5mg 0.75mg and 1mg per 1ml each by spin coating at3000rpm and anneal it at 100c for 10 min.Then i did photoluminscene...
08 September 2018 7,765 3 View
i have deposited Graphene Oxide on FTO glass with conc. 0.25 mg. 0.5 mg, 0.75 mg. , 1 mg, and 1.25 mg per 1mL. After that i have deposited gold nanopartilces on graphene oxide via spin coating...
06 July 2018 2,361 2 View
i have made graphene oxide by improved hummers method. out of this i have taken 100 mL GO and then i have add 2 g NaBH4 at 80 degree for 1hr. But after this i can not filter it by filter paper....
04 May 2018 3,144 0 View
I making a composite of GO: Au NPS. i have disperse graphene oxide in organic solvent like NMP, DMF. and Gold nanoparticle in organic media where i am using formaldehyde, cyclehexane and...
01 February 2018 4,456 0 View
Require for Rietveld refinement in XRD.
08 August 2024 3,081 2 View
During low-temperature testing, new diffraction peaks that appear could be indicative of several phenomena. In one of our tests, we observed notable new peaks around 40° and 45° in a specific...
06 August 2024 726 3 View
I want to refine one XRD peak of my in-situ xrd but the background is never working good which ultimately fails the refinement. How to refine and adjust the background using GSAS-II
05 August 2024 5,291 2 View
Dear Researchers Kindly share JCPDS 65-7246 file Thanks in advance
04 August 2024 5,613 1 View
I have been using paraffin, but the deposited ZnO still detach from electrode. What is the best binder to modify graphite paste electrode with ZnO nanoparticles?
03 August 2024 4,624 3 View
I imagine the battery drives the graphite into a carbocation, then chloride is oxidized to donate the electron to the carbocation, but what pushes the lost electrons of chloride to be shared...
03 August 2024 5,384 0 View
How to calculate the molar proportions of the oxides from the XRF analyses?
02 August 2024 2,565 2 View
I fabricated Ti3C2Tx using concentrated HF 40%, I plot an XRD as attached image below.. please let to know if I obtained it or not.
02 August 2024 6,789 4 View
I am in search of a modified Hummer's method, which can be used to synthesis graphene oxide within 6-8 hours. As I am a student it is not allowed for us to work after 5 in the laboratory. So I am...
01 August 2024 8,368 2 View
The starting material is a finely ground powder. Some particles contain more graphene than others.
30 July 2024 3,978 2 View