Can anyone suggest me AI and WSN integrated Simulators and Emulators which are more suitable for real time applications?

For building the prototype of any of the real-time applications, the algorithms mostly are AI based AI-based. Hence, it would be better if the integrated tool is available to develop the...

07 June 2020 8,580 6 View

How to avoid dissolved gasses in Ni base alloy melting practice?

Ni with 3%Si tapped at 1300 degree Celsius shows bubbles structure on the Riser top.

23 November 2018 348 3 View

Help me to identify German Project leader?

i am planning to apply for a Indo-German Collaborative Research Activities in Materials Science and Engineering in DST.the research field is organic solar cells.

18 September 2018 8,919 2 View

How do I store/handle the polymeric electrospun scaffolds?

I have been producing polycaprolactone fibers by means of electrospinning on an aluminium foil onto a metallic collector plate. After the polymer fibers have deposited on the foil, I remove it...

24 April 2017 7,903 3 View

What is the best method used to align the diffractometer plane/axis with respect to the incident beam direction?

Most of the XRD community is presently using 0D point counter or 1D linear PSD (position sensitive detector) in powder diffraction as well as rocking curve analyses. Any mention of the extinct...

02 December 2016 5,307 3 View

How do I calibrate the diffractometer 2Theta angles with this powder diffractogram of corundum standard from a Bruker D8 XRD instrument?

04 November 2016 4,212 4 View

How do I compute b, Burgers Vector correctly using the Hirsch approach to computing dislocation density employing XRD rocking curve profile analysis?

19 September 2016 2,394 8 View

SiC 6H - What periodicity would create a Debye-Scherrer arc at about 2 degrees 2-Theta using Cu K Alpha 1 only in HRXRD observation -1 to +3 degrees?

While collecting XRR data (-1 to +3 degrees 2Theta) for a SiC 6H 75mm diameter wafer, a reflection was observed at about 2 degree 2-Theta on the 2D detector as well as the XRR Omega-2Theta scan....

12 May 2016 8,437 2 View

Are there case studies on larger adoption of agriculture technologies after adaptive trails at farmers field?

An adaptive trail result that can make larger impact for more communities to adopt

03 March 2016 3,757 5 View

Is there a unit of mass flow rate/volume flow rate by the name "Stoc"? How it may be converted into SI units?

Must be some old unit of measurement.

07 December 2015 3,795 4 View

How to analyze a particular region of my simulation box in GROMACS?

Hi, I am using GROMACS 5.1.4 to simulate water in contact with a surface. I am only interested to calculate some properties of water near the surface. Let's say at a distance of x nm from the...

03 March 2021 9,989 2 View

How to get onecolumn document from standard IEEE ACCESS LateX template?

I have prepared a manuscript in IEEE Latex template, but for some purpose, I need to prepare a word file as well (detailed format is not required). Compared to two column .tex file, one column...

02 March 2021 1,830 3 View

How can the modification of garden soil cause global warming?

Hello, I am working on a soil project and I found a primary research article that tests how the modification of agricultural soil can cause global warming, using a thermal collector, however I...

02 March 2021 7,161 3 View

Does anyone know how to plot my station to a section plot on Ocean Data View (ODV)?

I made a vertical section plot with WOA .nc file on ODV, and now I want to plot my stations (csv. file) in it. Does anyone know how to import my points to the section? They are two different...

01 March 2021 3,610 1 View

Does anyone know to clarify these changes?

01 March 2021 1,290 2 View

How can I convert .vesta file to a .cif file?

I've used the "export data" option in Vesta software to convert my unit cell into a cif file however when I use that cif in atomsk it shows error such as "can't read the position of atom 0". If I...

28 February 2021 4,966 3 View

How can we use a hybrid element in Abaqus Dynamic/Explicit for impressible materials?

Hi, all! How can we use a hybrid element in Abaqus Dynamic/Explicit for impressible materials? I have not find the choice for explicit element in Abaqus CAE. I am wondering whether it is possible...

25 February 2021 9,936 2 View

No title

25 February 2021 5,713 1 View

Anyone that can help with Maxquant TMT16plex which is missing?

Hi I am very new to proteomics analysis. I have got raw files from core facility running thermofisher TMT 16plex 4 hours. I cannot find on maxquant the option TMT16Plex there is only up to 11...

25 February 2021 1,675 3 View

How to search for crystal structure for material with atomic position labelled?

I am using the crystallographic open database and materials project to search for cif file but the exact structure is not mentioned or how can I deduce that the given structure and atomic position...

23 February 2021 6,723 2 View