In XRD, usually I get the highest peak for Fe3O4 at 311 like most reports but in a few of my characterizations, I am observing the highest intensity peak at 220. Are the particles favoring that orientation or is it a different phase?
There is a lot of matrix effect that disable me to quantify it. what i need is a quick and fast extraction method. what should i add?
13 May 2024 6,902 2 View
I have 4 groups in my study and I want to analyse the effect of treatment in 4 groups at 20 time points. Which test should I chose?
19 September 2023 2,475 5 View
Hey, I know that sakaguchi test works for detection of arginine. However, I wonder if it works for detection of cRGD as well. I found some articles stating that it does, but I couldn't find any...
15 July 2021 7,598 0 View
Hi, I have to simulate pore-throat geometry such that the model is partially saturated with the oil which is stuck to the walls of the pore. The geometry has one inlet and two outlets at an equal...
09 January 2020 4,626 3 View
What is the refractive index and viscosity of FBS and PBS to be used in DLS measurements. Please bear in mind, we dont have refractometer or viscometer in the lab. So, what are the values we...
21 April 2019 6,497 5 View
So, I have made nanoparticles capped with oleic acid and want to do their ftir but the problem i am facing is that i am unable to get them to dry because of the polymer (they are dispersed in...
20 February 2019 784 7 View
I tried to synthesize oleic acid capped Fe3O4 nanoparticles and much to my surprise, they provide a strange XRD pattern (when started from 5 degrees (2 theta)). It shows a peak at ~7 (50% relative...
22 October 2018 4,990 7 View
Hi I would like to know the reason as to why most papers report that coating of unordered silica before adding a shell of mesoporous silica over it. Thanks
24 May 2017 2,368 2 View
I have multiple papers telling that Folate receptors are over expressed in some cancer cells. I would to know, why is it so?
05 December 2016 927 1 View
Hey Guys, I am about to set up a drug release experiment and it requires the pH of buffer to be tumorigenic to mimic tumors. I went through literature and it tells that people have used pH ranging...
22 November 2016 6,336 5 View
I would like to learn more about SPSS and Its application especially in regards to data analysis. Please suggest me how I can learn more about it. Thank you so much.
11 August 2024 9,101 4 View
I have reverse sequences (AB1 format), can I base on reverse DNA sequences to perform nucleotide alignment, convert nucleotides to amino acids and deposit the sequence in GenBank database?
11 August 2024 5,138 1 View
Hello, Why do i see this baseline drift when i compare my blank (black) to the sample (blue)? Any suggestions as to why this happened? Thank you!
11 August 2024 3,770 4 View
Willett, Shenoy et al. (2021) have developed a brain computer interface (BCI) that used neural signal collected from the hand area of the motor cortex (area M1) of a paralyzed patient. The...
10 August 2024 7,180 0 View
I'm currently exploring the application of Python in textile engineering, specifically in areas like data analysis, process automation, and the development of smart textiles. I'm interested in...
10 August 2024 7,429 2 View
I am using Rhodamine6G as gain medium and silver nanoparticles as scatterers on a microscope slide and laser input 532 nm comes from above.
09 August 2024 9,894 2 View
How can I use the cif data obtained from rietveld refinement extracted via gsas2, for microstructural analysis using ETEX software?
09 August 2024 7,718 0 View
Require for Rietveld refinement in XRD.
08 August 2024 3,081 2 View
Let's say we have a standard, regular hexagonal honeycomb with a 3-arm primitive unit cell (something like the figure attached; the figure is only representative and not drawn to scale). The...
07 August 2024 1,937 1 View
A fungal strain was treated with nanoparticles. We want to do an environmental SEM analysis. So could anyone share your views on preparing the sample? Thank you.
07 August 2024 5,307 1 View