Can anyone please provide me any evidence of using CVD grown graphene for heavy metal removal from water?

More Md.Akibul Islam's questions See All

How to transfer a CVD grown monolayer of hBN from the Cu foil to a polymer substrate?

i am looking for ways to transfer hBN nano sheets from the Cu foil used in the CVD process to a polymer substrate (PDMS or PMMA)

31 December 2019 2,348 7 View

Can anyone please provide me with a paper or book regarding the basic nucleation process of graphene on Ni substrate?

I am trying to learn how nucleation of graphene actually happens on a Ni substrate.

05 June 2019 3,907 3 View

Why the position of the XRD peak of CdS changes when I use Ni anode instead of Cu?

XRD

02 March 2019 573 1 View

Why the intensity of the XRD of CdS changes when I use Ni anode instead of Cu?

XRD analysis of CdS

02 March 2019 1,735 4 View

Is it possible to probe the conductivity of exfoliated graphene using scanning probe microscopy (i.e. cAFM) ?

I am trying to measure the conductivity of exfoliated graphene nano sheets using conductive atomic force microscopy

31 December 2018 6,869 4 View

How much energy is required to peel of a single layer graphene from bulk graphite (using liquid exfoliation)?

Graphene Exfoliation

11 December 2018 5,551 0 View

How to calculate the number of layers in nano sheets of the exfoliated MoS2 from it's UV ViS spectra?

I am trying to estimate the number of layers present in exfoliated 2D MoS2 nano sheets from it's UV ViS spectra

10 November 2018 5,482 2 View

What kind of shifting of the peak position (in the Raman spectra) of the G (1590/cm) is observed when graphite is exfoliated in few layer graphene?

I am asking a technical question regarding the Raman spectra of graphene

09 October 2018 2,625 2 View

How to calculate extinction from absorbance/tranmittece?

I am trying to measure the extinction of a solvent which contains nanomaterials.

09 October 2018 6,013 4 View

Why do the larger exfoliated graphene flakes have higher ID/ID' than the smaller flakes?

I am size selecting the graphene produced in the lab. While performing Raman analysis, I am finding that the larger flakes have a greater ID/ID' than the smaller flakes. Could anyone please...

08 September 2018 3,269 4 View

• What the possible Persistent Organic Pollutants and Heavy metals present in fluorspar, sediments, and water bodies around its mining area?

Approximate concentrations are require in compared with the WHO permissible limts

11 August 2024 2,722 1 View

What procedure should I follow for current controlled PPy film electrochemical deposition on ITO?

For example, I perform passivation process before electropolymerization of Py for adhesion to titanium surface. Is a similar or different procedure required for ITO? If necessary, I would be glad...

06 August 2024 3,175 0 View

What is the best conditions for formation Magnetite ore deposits?

I want to know more about Magnetite deposits.

06 August 2024 1,066 0 View

Binder for ZnO nanoparticles in graphite paste electrode?

I have been using paraffin, but the deposited ZnO still detach from electrode. What is the best binder to modify graphite paste electrode with ZnO nanoparticles?

03 August 2024 4,622 3 View

Why chloride turns into chlorine gas in a Downs cell?

I imagine the battery drives the graphite into a carbocation, then chloride is oxidized to donate the electron to the carbocation, but what pushes the lost electrons of chloride to be shared...

03 August 2024 5,384 0 View

How can I find access to heavy metal reference doses from the EPA and WHO websites?

Reference dose and Maximum acceptable concentrations HMs

03 August 2024 8,229 4 View

Short Synthesis of Graphene Oxide from Natural Graphite Flakes?

I am in search of a modified Hummer's method, which can be used to synthesis graphene oxide within 6-8 hours. As I am a student it is not allowed for us to work after 5 in the laboratory. So I am...

01 August 2024 8,366 2 View

Best mask design for metal deposition aiming build a Perovskite solar cell device?

What types of mask designs for metal deposition, to be used in a PVD system, are best suited for perovskite-based solar cells?

31 July 2024 4,833 3 View

How can I separate graphene from amorphous carbon of similar particle sizes?

The starting material is a finely ground powder. Some particles contain more graphene than others.

30 July 2024 3,977 2 View

What is the solubility of Iron (+3) in Bismuth Oxide?

Dear all: I am modifying Bismuth Tungstate with Hematite (Fe2O3), so I would like to know about how much Iron(+3) can form a solid solution in a Bismuth Oxide matrix. Best wishes Marco

29 July 2024 2,160 1 View

Ghulam Yasin

Dear Md.Akibul Islam,

Please check the papers given below, these will be helpful for you to use CVD grown graphene for heavy metal removal from water.

Article Application of Graphene for Decontamination of Water; Implic...

Graphene based adsorbents for remediation of noxious pollutants from wastewater

https://doi.org/10.1016/j.envint.2019.03.029

regards,

Md.Akibul Islam

Thank you Sir