Can anyone please provide me with a paper or book regarding the basic nucleation process of graphene on Ni substrate?

More Md.Akibul Islam's questions See All

How to transfer a CVD grown monolayer of hBN from the Cu foil to a polymer substrate?

i am looking for ways to transfer hBN nano sheets from the Cu foil used in the CVD process to a polymer substrate (PDMS or PMMA)

31 December 2019 2,144 7 View

Can anyone please provide me any evidence of using CVD grown graphene for heavy metal removal from water?

I am looking for a potential application of CVD grown graphene. I am wondering if there is any literature on it. Almost all the literature on heavy metal removal from water is with Graphene Oxide....

06 July 2019 7,031 2 View

Why the position of the XRD peak of CdS changes when I use Ni anode instead of Cu?

XRD

02 March 2019 401 1 View

Why the intensity of the XRD of CdS changes when I use Ni anode instead of Cu?

XRD analysis of CdS

02 March 2019 1,556 4 View

Is it possible to probe the conductivity of exfoliated graphene using scanning probe microscopy (i.e. cAFM) ?

I am trying to measure the conductivity of exfoliated graphene nano sheets using conductive atomic force microscopy

31 December 2018 6,686 4 View

How much energy is required to peel of a single layer graphene from bulk graphite (using liquid exfoliation)?

Graphene Exfoliation

11 December 2018 5,377 0 View

How to calculate the number of layers in nano sheets of the exfoliated MoS2 from it's UV ViS spectra?

I am trying to estimate the number of layers present in exfoliated 2D MoS2 nano sheets from it's UV ViS spectra

10 November 2018 5,303 2 View

What kind of shifting of the peak position (in the Raman spectra) of the G (1590/cm) is observed when graphite is exfoliated in few layer graphene?

I am asking a technical question regarding the Raman spectra of graphene

09 October 2018 2,438 2 View

How to calculate extinction from absorbance/tranmittece?

I am trying to measure the extinction of a solvent which contains nanomaterials.

09 October 2018 5,810 4 View

Why do the larger exfoliated graphene flakes have higher ID/ID' than the smaller flakes?

I am size selecting the graphene produced in the lab. While performing Raman analysis, I am finding that the larger flakes have a greater ID/ID' than the smaller flakes. Could anyone please...

08 September 2018 3,129 4 View

How can you bring two structures together to create an adhesive bond in LAMMPS?

I have created an Ice 1h crystalline structure and an Aluminium substrate structure and equilibrated both at 250K. Now I need to bring them together in a way that an adhesive bond is created....

01 March 2021 3,325 2 View

What are the new 2D nanomaterials were used for Silver nanoparticles stabilization?

In the stabilization of AgNPs are vital in current research interest. However, some of the 2D nano-materials like graphene oxide, MoS2, etc... previously used to stabilize it. But still they shown...

01 March 2021 2,207 3 View

How does charge on working electrode changes with rising potential?

During performing CV of a GCE or modified GCE, we rise the potential in the first half of the cycle and reduce it in reverse half. During the first half, what is the nature of charge on GCE or...

25 February 2021 7,994 3 View

How to identify what type of fillers are in a polymer?

Hello everyone, I have some PHAs blended with fillers and nucleating agents, yet I don't know what kind of fillers or nucleating agents. The producer has shut down and there's no way to get in...

24 February 2021 1,356 8 View

How to delaminate copper in water-based anodes?

Hello everyone, I'm looking for a way to delaminate copper current collector of water-based anodes in Li-ion batteries without damaging the graphite film. I tried different materials such as HNO3...

24 February 2021 3,785 3 View

Thermal reduction of graphene oxide.?

I am trying to reduce graphene oxide by thermally but I have no proper information regarding this. Can any one help me regarding the details about temperature and time for the reduction of...

23 February 2021 4,155 4 View

What kind of steel moulds are used for hot pressing metal powders?

My main concern is that the metal powders should not weld to the mold surface and I should easily be able to eject out the pressed samples. I am looking for alternative for graphite moulds. The...

22 February 2021 2,965 4 View

Is there an ideal incubation time of RGO-modified SPCE before subsequent use, i.e., electrochemical characterization or further modification?

I notice that upon washing and air-drying of my RGO/SPCE surface and characterizing again via DPV, the current response towards ferricyanide probe significantly decreases. My worry is that the...

22 February 2021 5,324 3 View

How to Study a proton NMR of Graphene prepared by Electrochemical Exfoliation technique?

I performed a Proton NMR of graphene powder prepared by electrochemical exfoliation technique. It shows some peaks. But I can't understand it.

21 February 2021 8,947 3 View

Which compound is getting oxidized during bulk electrolysis with TFAA?

The experiment is really simple. When I do a bulk electrolysis with 1% TFAA (ACN solution) to get dihydrogen, what is going to be oxidized? (working electrode graphit, counter electrode platinum,...

18 February 2021 4,430 1 View

Fernando Vallejos-Burgos

Article A critical review on the contributions of chemical and physi...

https://arxiv.org/ftp/arxiv/papers/1104/1104.0063.pdf

https://hal-polytechnique.archives-ouvertes.fr/hal-00601452v2/document

Behnam Farid

Consult [1].

[1] Y Liu et al., Adv. Sci. 5, 1700961 (2018).

https://doi.org/10.1002/advs.201700961

Rami Joseph Aghajan Sldozian

you can see this article I hope will benefit you