Is it possible to define the criteria such that if the criteria fulfills, element will remain active and if not, then it will be inactive or dead ?
Thank you very much Mr.Andrew.
kindly go through the following link will clarify your doubt on element birth and death in ANSYS
http://mostreal.sk/html/guide_55/g-adv/GADV6.htm
Dear All, I am trying to validate VUMAT (provided by Simulia and modified by me) written for the progressive damage analysis of CFRP rods with the help of problem dealt by Fang et al. (2021),...
20 December 2023 4,108 0 View
Hello everyone it will be of great help to me as I am working on my dissertation, I have enzyme activity in mg/ml for papain, just need to calculate it in percentage. Thank you.
14 August 2023 513 1 View
I need to formulate the lagrangian dynamic equations for the hexapod robot's body. The body will constitute 6 DoF, which is 3 linear and 3 angular. I have the coordinates of each corner of the...
24 December 2020 1,618 1 View
The Coriolis matrix S(q,q') in the Lagrangian formulation is a coupled n*1 matrix. But in many mathematical models, an n*n Coriolis matrix S(q,q') multiplied by q' is used. I need to understand...
16 November 2020 3,940 4 View
Hello, Can anyone confirm the authenticity of the following conference to be held at Singapore this year. I have been seeing many mixed reviews regarding this conference, it would be kind help if...
16 June 2019 8,981 3 View
This question is aimed at solving the traffic problem of Pune City where we are trying to select one of the Public transport systems between BRTS and MRTS, which further will be analyzed and...
16 November 2018 1,533 3 View
I had performed CV for a DNA sample in DI (without buffer) with Ag/AgCl (ref), Pt wire (CE) and Gold working electrode with constant scan rate and exposing the setup to UV light during...
12 February 2018 7,269 7 View
Liquid jet is formed from molten pool surface and the jet keeps growing under influence of driving forces like buoyancy, viscous, surface tension and electromagnetic forces. Whenever the jet...
26 September 2014 5,659 3 View
I need to model an anisotropic material in which the Poisson's ratio ν_12 ≠ ν_21 and so on. Therefore, the elastic compliance matrix wouldn't be a symmetric one. In ANSYS APDL, for TB,ANEL...
09 August 2024 5,048 2 View
I am not able to find how I can provide tangential stiffness in ansys workbench The normal stiffness option is there. But how I can enter tangential stiffness I have read somewhere tangential...
29 July 2024 2,032 2 View
Hello. I have the geometry of a blade in CAD file (stp) and I want to prepare the blade for meshing with turboGrid. I must import this file into designModeler and then transfer to the...
27 July 2024 356 3 View
I performed fea on tensile dog bone specimen using ANSYS static structural and also tried using ANSYS explicit dynamics. In experimental result the load is 500 N and deformation is 0.6 mm...
13 July 2024 3,631 4 View
I have a 3D output in the figure section of Matlab, does anyone know a way to transfer it to Abaqus or Ansys? Or in what format should I save it so that these analysis software can analyze it?
09 July 2024 9,226 3 View
Regarding the system coupling issue where the update of the solution component fails, the system coupling update for fluid flow (Fluent) triggered an exception: "Update Solution Failed."
30 June 2024 7,894 1 View
Hi everyone, I want to import an STL geometry (surface meshed with 2D meshes) into ANSYS APDL. After importing, I also want to mesh the structure with SOLID187 elements to convert it into a solid...
25 June 2024 4,286 4 View
I am trying the simulate the drum brake squeal in ansys. For giving the rotational velocity to drum what should i use the Rotational velocity or CMROTATE command.
24 June 2024 5,125 0 View
I need to get the eigenvalues after a modal analysis in ansys workbench. Is there any next APDL command that will get the required result.
20 June 2024 1,668 0 View
Hello all, I've compiled a udf which reads velocity data with corresponding time stamp from a .csv file using DEFINE_ON_DEMAND macro. Then, I use DEFINE_PROFILE to define an inlet velocity profile...
14 June 2024 6,480 0 View