Can Ag/AgCl reference electrode can be used as the gate electrode for graphene FET measurements?
Hi Niazul
Yes it can be used as a top gate electrode. There are many published works using the Ag/AgCl reference electrode for their FET measurement.
Good luck
you mean: Ag/AgCl in KCl?
Not sure if KCI can be used as gate dielectric.. In order to result pinch-off comparably strong electrostatic potential need to apply to the channel.
How can aptamer-protein interaction can be best modeled? Can Langmuir isotherm be used to model the aptamer-protein interactions? Some papers use Langmuir isotherm to model DNA hybridization....
03 April 2019 4,640 2 View
I am modifying graphene with amino linked aptamer with PBASE crosslinker. Can you please let me know whether it is possible to characterize aptamer immoblization on graphene using XPS?
02 March 2019 1,957 5 View
I would like to explore the thiolated aptamer-gold nanoparticle interaction. I need to know how many aptamers can anchor on a gold nanoparticle of a certain radius. I would highly appreciate if...
02 March 2018 4,965 4 View
How NMP performs as a solvent for SEM?
11 December 2017 1,825 3 View
It is reported that functionalization of DNA on graphene FET (GFET) causes shift in the Dirac voltage of GFET ? Thsi shift can be two ways: by gating effect or by doping effect. What is the...
09 October 2017 638 1 View
I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...
10 August 2024 3,629 1 View
I am using Rhodamine6G as gain medium and silver nanoparticles as scatterers on a microscope slide and laser input 532 nm comes from above.
09 August 2024 9,894 2 View
I have been using paraffin, but the deposited ZnO still detach from electrode. What is the best binder to modify graphite paste electrode with ZnO nanoparticles?
03 August 2024 4,624 3 View
I am in search of a modified Hummer's method, which can be used to synthesis graphene oxide within 6-8 hours. As I am a student it is not allowed for us to work after 5 in the laboratory. So I am...
01 August 2024 8,368 2 View
The starting material is a finely ground powder. Some particles contain more graphene than others.
30 July 2024 3,978 2 View
My screen printed electrode CV is given here. For Nerstean one electron reaction the delta E value should be close to 57 mV and ration of Ic/Ia should be close to 1. I did CV of my screen printed...
30 July 2024 4,671 3 View
We are working on biopolymeric hydrogels. Our system is highly viscous and sticky, and the gel formed are high in strength. We are unable to use pH electrode and pH strip. Please suggest an easy...
30 July 2024 942 2 View
Here, I have used Ag/AgCl as reference electrode and 0.5M KOH.
29 July 2024 4,538 3 View
While I am doing HER, I noticed that nyquist plots of Electrochemical Impedance Spectroscopy (EIS) is not complete. Will it affect for the Linear Sweep Voltametry (LSV) data? However, I can found...
26 July 2024 7,542 4 View
As shown in the figures, there are several abnormal charge/discharge curves.Each of them may have different problems. I am curious why these situations appeared differently?There are a lot of...
24 July 2024 6,930 1 View