Has anyone had success in inducing senescence in H9c2 cells using hydrogen peroxide at low dosages (10uM -20uM) for 24 hours?
I am battling to induce senescence in this cell line and am wondering if anyone can provide some help or recommendations
Hello,
it's 30 mmol/L of H2O2 for 2 hours and then you will have Beta Gal positive cells 3 days after stimulation. Here is the paper
DOI: 10.1371/journal.pone.0077034
Good Luck
Dear Lina, Thank You for interesting suggestion, please check the units value.
Increasing the concentration of H2O2 to 150uM for 24 hours might help! I use this concentration for Human derived fibroblasts.
Hello. I am working on ROS production of two systems: system A is cerium oxide and hydrogen peroxide, system B is cerium oxide nanoparticle, hydrogen peroxide and potassium bromide. I did some...
04 August 2024 5,974 3 View
I heard an explanation about something being a better proton acceptor or lone pair donor but that doesn't make sense. I couldn't explain in in terms of acid-base theory. The hand-waving way I saw...
03 August 2024 9,918 0 View
Hi guys If anyone is currently working on aging cells, you guys would like to give me some advice. I'm testing against biomarker (SA-beta-Gal), I encountered a false positive in the control group...
02 August 2024 6,735 1 View
I'm trying to calculate the tolerance factors of the hydride perovskite and the value calculated by me and the reported values are contradictory. Need more clarity in using the correct ionic radii...
01 August 2024 2,614 1 View
Hello Everyone! I am trying to create a metal hydride system where I am trying to create a temperature control with the emphasis on measuring the concentration of the hydrogen with the hydrogen...
29 July 2024 7,577 2 View
I'm new to primary human fibroblast culture and I'm studying aging using cells from old and young donors. Some research groups have used media supplemented with FGF2, so I cultured cells in the...
29 July 2024 3,030 2 View
For people today, the enigma of the size of the proton still remains enigmatic. However, being myself a researcher in new physical theory which makes it possible to extend the different standard...
28 July 2024 7,823 1 View
In general, when performing a Tafel analysis for corrosion resistance measurements, a line voltage scan is performed from say -250 to +250 mV vs. OCV at low scan speed around 0.125 mV/s. However,...
25 July 2024 7,982 3 View
I have tried to saturate ferritic steel with hydrogen using the electrolytic method and H2SO4. However, the effect was very poor even after 3 days of "saturation". Can anybody help in choosing a...
24 July 2024 4,393 2 View
I am new to research. The boiling point of triethyl amine (NEt3) is 89 degrees centigrade. I am skeptical that when I will let the hydrogen escape which is getting generated in situ, I will also...
21 July 2024 7,284 4 View