Do we need to write protocol for a second study of a systematic review that has been registered and published?

I have conducted and published a systematic review and meta-analysis research with the topic related to public health and health pomotion (protocol was registed in PROSPERO). Now we want to...

03 March 2021 8,920 3 View

Build an orthogonal box in ASE?

Hello, I was wondering the best way to build an orthogonal box filled with a defined crystal structure in ASE. I know it could be easily done in LAMMPS, but I guess it is also doable in ASE. The...

21 February 2021 5,899 4 View

Where can the fault diagnosis data set of lithium battery be found?

Most of the data sets on the network only contain good information about the voltage and internal resistance of lithium batteries. The data of faulty battery is missing. Who can help me, I will be...

21 February 2021 8,659 1 View

Where can I find these two papers?

14 January 2021 1,572 3 View

How to make sure each cavity modes with same E-field distribution in COMSOL simulation?

In COMSOL Application Library, there is case about waveguide adapter. But there are some questions: 1) In boundary mode analysis, it just set to find only 1 mode and the S-parameter is...

12 January 2021 9,383 2 View

Where to get per-unit ecosystem services value coefficients for cities?

Per-unit ecosystem services value coefficients are wisely used in ecosystem services research, which is usually in the unit of "money per area for certain ecosystem type/services". The ecosystem...

06 January 2021 4,230 3 View

How to count the number of figure when reusing figure??

Dear all I'm preparing a review paper and confused about terms for reusing figure in other papers... Can you please help me for 2 question..?? (1) As i know, the cost of reusing figure are...

28 December 2020 1,515 3 View

How to detect protein from dying cells?

Hello, experts. I have been struggling during my Western blot. Briefly, I transfected my gene into two different breast cancer cell lines. The introduction of my gene triggered cell death in one...

03 September 2020 8,799 3 View

How can I digest the formaldehyde (1%) crosslinked DNA-protein with restriction enzyme (DpnII) better?

I am working on yeast samples for 4C-seq study , but the formaldehyde fixed samples can not be digested with restriction enzyme (DpnII). Please help me out. Thanks.

28 August 2020 6,483 3 View

What's the difference in antibodies used in ELISA,FACS and IHC?

Hello, I have a question about antibodies used in ELISA, FACS, and IHC. Assuming that an antibody is not labeled or conjugated, what's the difference among them? Can I treat those antibodies in...

27 July 2020 716 11 View

Chlorinated organic formation in odor control scrubbers using hypochlorite?

I'm involved in a study of odor control technologies for municipal wastewater treatment plant. One of the control options involves a chemical 2-stage (acid/alkaline) packed bed scrubber. The...

03 March 2021 3,661 2 View

What solvent can I used for Paal Knorr reaction between 6-amino hexanoic acid and 2.5 hexanedione?

I am try to make the Paal Knorr reaction between 2.5 hexnedione and 6-amino hexanoic acid, my problem is type of solvent to use, because 6-hexaminohexanoic acid is soluble in water but I am not...

02 March 2021 4,443 2 View

Ester cleavage conditions?

Hi all, I need to cleave the ester in Ethyl 2-amino-1H-imidazole-5-carboxylate to make the carboxylic acid and retrieve the product from solution to use in downstream applications of linking to...

01 March 2021 8,766 3 View

How to remove DCU and HOBT from my reaction?

I am doing a acid and a chiral amino alcohol reaction using DCC and HOBT in DCM or THF? Can anyone suggest me how to remove DCU and HOBT from a reaction mixture??

28 February 2021 2,153 1 View

What is the most common number of epitopes in an multi-epitope Vaccine?

hi everyone, I'm interested in the field of vaccine design specifically multi-epitope cancer vaccines , I want to know if there is a minimum and maximum number of epitopes we could use in a...

27 February 2021 3,882 3 View

How to increase solubility of Poly acrylic acid in Dioxane solvent?

I am working with Polyacrylic acid (100.000Da) and instead of water, I need to use another solvent (dioxane) to dissolve PAA. However, because of the high molecular weight, it's quite hard to...

25 February 2021 2,225 5 View

Why is NH4OH added in heavy metals limit test?

The limit test I'm referring to is USP method II. In this procedure you need to dropwise add 6N of NH4OH to the sample until it the pH is alkali. After that you need to dilute and add HOAc until...

23 February 2021 2,049 3 View

Is it efficient to do liquid biopsy to investigate the gene expressions of the tumor?

To do liquid biopsy and look for specific gene expressions there are so many published papers. Thera are different protocols and procedures used to isolate circulating cell free RNA or mRNA from...

23 February 2021 7,326 5 View

Is this the write procedure for acid digestion of soil for heavy metal analysis using AAS?

How to do acid digestion of soil sample with 3:1 aquaregia in an open vessel?

23 February 2021 3,053 7 View

What is the biochemistry of acidic solvents for phenolics extraction in strawberry?

I am using the Folin-Ciocalteu method for analysis of total phenolic content in ripe strawberries. I've read several protocol that suggest a methanol/H2O/formic acid (80:19:1) extraction solution....

22 February 2021 6,560 3 View