Contact experts in Gas to get answers
1,926 views 928 posts
Questions related to Gas
Geopolymer, derived from flyash, NaOH, Al powder is required a heat treatment inside the muffle furnace. It may cause releasing hydrogen gas inside the furnace. Will it be explosive? or dangerous?...
12 July 2020 3,495 3 View
I would like to use remote sensing to determine water quality. I have seen that remote sensing can be used for phosphorus and nitrogen; however, I am specifically interested in inorganic...
06 June 2020 7,678 9 View
I'm doing a research work on gas core nuclear rocket and I wanted to learn nueutronics software inorder to study the motion of neutrons and it's behaviour, and also to find the criticality and to...
05 June 2020 1,073 1 View
We often work with bioactives from plant sources and check the inhibitory potential of these on cytokines when macrophages are stimulated with LPS. It is often observed that at higher...
01 June 2020 9,237 0 View
I know that molecules can be aligned by a two-color pulse. But for polar molecules without inversion symmetry, the orientation (up versus down) is also important. Can the molecular orientation be...
08 May 2020 9,360 2 View
please anyone suggest me papers from where i can infer concepts .
06 May 2020 2,531 0 View
Dear Fellow Researchers, Need your advise on the following - 1. I wanted to know may journals like below ask for a code submission. I wanted to know if papers get rejected without submitting the...
05 May 2020 2,560 0 View
when we react aluminium acetate with carbon dioxide gas at a specific flow rate what is supposed to form?
01 May 2020 3,568 4 View
Dear Colleagues, I have a number of questions on the above topic that I require some assistance to be addressed in order to gather some insights for my research. 1. What are the challenges...
11 April 2020 5,929 0 View
I want to feed an electrolysis cell with a 80:20 H2O:H2 gas mixture at a rate of 100 ml/min. What is my best chance of getting a stable gas mixture at low flow rates?
09 April 2020 1,312 4 View
RNA Helicases are responsible for destroying foriegn RANs in cytoplasm and out side the endosomes unlike TLR-3,7 and 9. Is it possible to activate these molecules to increase their activity as an...
08 April 2020 1,876 0 View
I am in the process of learning to use Towhee (http://towhee.sourceforge.net/) which was recommended to me to help with my research in hydrogen storage. I have got to the stage where its setup and...
03 April 2020 5,043 0 View
I am interested in wax management in multiphase pipelines and risers. Is this within the scope of this project?
25 March 2020 3,585 3 View
Hello everyone, I am looking for some references to understand the flow patterns when high-velocity gas is injected into a liquid tank. I want to see how the flow patterns are changing from...
23 March 2020 9,408 4 View
bc
18 March 2020 9,416 2 View
I use H2 (gas) on Pd to deprotect a Cbz group on a system that has a thiazole ring. Due to the presence of sulfur in the thiazole ring I have to use high amounts of Pd to get the reaction done. I...
09 March 2020 851 3 View
I need to reduce the number of existing warehouse without compromising with the lead time to serve the customer. Can anybody suggest which method i can use to solve the problem? GA algorithm is...
07 March 2020 8,939 12 View
Some rocks with appreciable amount of felsic and mafic minerals have been crushed. In order to melt the rock at low temperature and/or to leach water-soluble cations, either boric acid (H3BO3) or...
06 March 2020 9,713 1 View
In my research , iam using dispersant in mortar to prevent gas entrapment and to enhance fibers with cement slurries. Whether dispersant should be replaced by cement in mortar or it should be a...
05 March 2020 8,035 4 View
I am running an electrolyzer which produces hydrogen gas and measured in milli liter. In order to find the efficiency, HHV must be known as J/ml. There are values in textbooks given in 39KWh/kg,...
04 March 2020 7,290 4 View
Hi, I am working on the fabrication of perovskite solar cells. Since perovskites are very sensitive to the ambient environment, therefore it is recommended to process them in inert environment of...
04 March 2020 10,001 5 View
Hi all, Iam focusing on the autoclave process for composite part manufacturing. In aircraft industry this process needs inert gases which can be either nitrogen or carbon dioxide, hpwever,...
03 March 2020 5,967 1 View
Raman spectroscopy technique is frequently used for various application but its application to determine the gas concentration in adsorbent materials in an adsorption process is not developed to...
29 February 2020 3,314 4 View
Hello, Can anyone tell me or provide a publication that can explain the effects of ammonium chloride on NK or T cells cytokine production? I am getting ready to perform some functional studies...
20 February 2020 5,825 3 View