Production, Testing, Dimensioning, Research on Composites | Contact experts in Composites to get answers
2,573 views 523 posts
Questions related to Composites
I want to know how to determine if my combination of super cell is precise also how to check its lattice mismatch and work function
01 January 2016 7,446 1 View
Hi All, I knew that for most composite, small strain theory is enough for the consitutive model for the ply (mesoscale damage model) because normally composite experience strain less than 5% for...
01 January 2016 5,755 1 View
Is it possible to mix Al390 with flyash?
01 January 2016 274 3 View
Hello, When you have your sample wich is 99% an organic crystal and 1% of a polymer with it (as a coating for instance), do you talk about XXX-based composite? You have such samples at 0.01% 0.1%...
01 January 2016 450 6 View
50-60 vol.% WC
01 January 2016 9,033 0 View
I want to know sintering mechanisms of TaC based composites. Is there any refrence?
01 January 2016 9,553 10 View
How can I perform analysis of micromechanical of composites? Which software is appropriate?
01 January 2016 5,042 30 View
1
01 January 2016 3,627 0 View
I have 0.8 mm thickness woven jute mat. how to find number of layer in the composite laminate
01 January 2016 9,740 2 View
What will be the exact reason? Sodium Hydroxide treatment
01 January 2016 624 1 View
how can I improve fiber composite material and use which resin is best
01 January 2016 4,540 7 View
My area of research is Magnetoelectric (ME) and magnetodielectric (MD) effect in SBN-LSMO and SBN -NZCFO composites.
12 December 2015 7,191 3 View
I calculate the band gap after the GR/SnO2 composite, why is zero?I can't explain why, I don't know that calculation is correct, I hope god can give me a reasonable explanation.thanks a lot!!
12 December 2015 9,558 11 View
composite materials Is the vacuum infusion techniques suitable for thermoplastic composite?
12 December 2015 3,363 8 View
fracture behaviour, fractography, particulate-filled polymer composites Why is there a smooth fractured surface of unfilled LDPE with a very large strain to fracture when compared with filled LDPE...
12 December 2015 1,554 2 View
When we fabricate a NFRPC by PP as base matrix and Wheat straw as natural fiber; using Injection moulding process, what effects are there on mechanical properties of the base material?
12 December 2015 8,729 4 View
name of the binder found locally
12 December 2015 5,130 1 View
Could someone help me to analyse the difference to use SiC and Al2O3 as reinforcement for metal matrix composites?
12 December 2015 5,458 9 View
N. Banapurmath, Vittal Rao Chauhan,Shetter.
12 December 2015 9,977 1 View
The laminate is two plies. One is high strength the other is high strain. Which should be at the impacting surface?
12 December 2015 3,594 0 View
I want to optimize the wear behaviour of a designed composite via PSO technique. Does anyone know how to implement PSO technique for the same?
12 December 2015 10,073 10 View
Dear All I want to prepare P25/GO composite using colloidal blending method. some papers do ultrasonication for graphite oxide in 30 ml, then dilute it to 230 ml before mixing with P25. Can you...
12 December 2015 8,169 2 View
Dear All I used TiO2/GO 5% wt composite to degrade carbofuran at UV 350 nm and the activity of P25 was better than P25/GO 5% wt composite Also I used in visible range and there is no any activity...
11 November 2015 2,613 11 View
I have observed some shifts in characteristics peaks of my metal oxide when it was combined with reduced graphene oxide. what can be the possible reasons?
11 November 2015 2,858 9 View