A mixture of metallic elements or compounds with other metallic or metalloid elements in varying proportions. | Contact experts in Alloys to get answers
2,271 views 987 posts
Questions related to Alloys
Dear all, I am trying to incorporate Avrami model for a multi-material extrusion process of a titanium and magnesium alloy. I have the Avrami coefficients and when I model each alloy separately...
28 January 2022 1,290 0 View
My purpose is to be sure about the closer data from ICP - OES before analysis to reduce the cost of ICP-OES. Is it possible to measure concentration of heavy metals by volumetric analysis or UV...
30 December 2021 4,528 6 View
Need some explanations, how elements separately effect or show synergic effect in alloys
08 December 2021 1,330 5 View
Wrought Al is already extruded grade then why most of researcher are not using Al cast grade And very few researchers worked on cast Al grade during stir casting. If one can given insight on why...
10 November 2021 2,022 4 View
Now I have Pt nanorods on carbon(please see the attached files). Is there any good idea to get some Pt-based alloy based on this? I would like to use them as catalysts in proton exchange membrane...
09 November 2021 2,688 2 View
obviously the porosity percentage of clay soil is relatively more than sand, but clay is impermeable /seal. what I know is the porous the geologic material the is higher its porosity will be. so...
04 November 2021 9,768 7 View
Hello all, can you advice me on how to develop thick compact TiO2 layer on titanium-based alloys, thickness aprox. 1 mm?
01 November 2021 6,256 4 View
Use atat to find the most stable structure. How to specify a specific concentration in the software for structure search during the establishment of convex hull, instead of randomly generating...
26 October 2021 7,197 3 View
Does anybody have thermo calc software download link for free ?
22 October 2021 5,513 2 View
Kindly suggest a best fusion welding method (GTAW or EBW) for joining Cast alloy Inconel 718 with Inconel X750
20 October 2021 2,700 5 View
How does each precipitate affect the hardening of these alloys?
19 October 2021 3,169 3 View
For AL6061 T6 Alloy what value we have to enter in Displacement at failure for ABAQUS FEA tool? i have attached screenshot of that window for ref.
18 October 2021 7,550 1 View
I am optimizing the thermal spraying process by device parameters such as current, voltage, atmospheric pressure, nozzle type and wire feed rate. How can the two parameters of electric current and...
09 October 2021 2,834 0 View
Equation is simple (1) Te=T0+ASL -------------------------------------------------------------------------- -Te : Energy (w/ splitting) -T0 : Energy (w/o splitting) -A : spin-orbit coupling...
04 October 2021 9,499 0 View
I always had a trouble. After the CuInS quantum dots were synthesized, the zinc precursor was thermally injected at a high temperature, so that the spectrum blue shifted by 70nm to form a...
29 September 2021 1,661 2 View
Hello, Please can someone explain how to find precipitation volume fraction of a phase in an alloy. for example, Al3Ti in Al-Ti alloy system. Can you explain how find out the volume fraction of...
24 September 2021 7,984 3 View
Regards
22 September 2021 7,337 1 View
Respected researchers, I am attaching herewith an M_H curve. Here the sample may possess both FM and AFM/PM behaviours. In order to identify the contribution of both magnetic behaviours, I used...
21 September 2021 8,354 3 View
In general, continuous dynamic recrystallization forms high angle grain boundaries for fully recrystallized grains in a severe plastic deformation process (e.g. friction stir processing) of...
20 September 2021 7,017 4 View
After Friction Stir Processing of this aluminium alloy, KAM and Grain Boundary maps are obtained by EBSD. It shows, the region of blue colored recrystallized grains in KAM map correspond to the...
18 September 2021 5,872 1 View
We have succeeded to etch only one Ni alloy, with Aqua regia.
13 September 2021 3,656 3 View
hello everyone. I want to use the EAM potential for simulating an alloy system in lammps. I read in the manual that it only needs to define single atomic potentials in these cases, like type 1 and...
12 September 2021 1,391 4 View
I prepared samples with different proportions of Gd in NdFeB alloys in which I replaced Gd with Nd. The coercivity increases as the amount of Gd doped increases. Why is that so? Thanks
09 September 2021 7,485 3 View
hello everybody, I need some help as I will start new research about the aluminium base alloy with mechanical alloying, how I can prevent oxidation of aluminium during the milling process?
07 September 2021 5,272 5 View