A mixture of metallic elements or compounds with other metallic or metalloid elements in varying proportions. | Contact experts in Alloys to get answers
7,686 views 1,165 posts
Questions related to Alloys
Hello everyone, I'm not able to do fatigue analysis of my model in ANSYS workbench, because I need some values .The material that I selected is ABS High Impact. I attach a file please check and...
20 September 2023 6,589 0 View
I have a system which I have measured In the zero field cooled and field cooled cooled arrangements. The system is an activated carbon with metal nanoparticles dispersed in/on the material. The...
18 September 2023 9,354 2 View
Experiment like slant shear test , Pull out test in Ansys Software
13 September 2023 2,038 0 View
Hi, I am a graduate student studying physics. I have crafted graphite anode half cell coin cells with pure lithium chip as the counter electrode. I am not fully conversant with MITs Pro yet so I...
07 September 2023 5,334 0 View
Note that C-4 was determined from the XRD peak shift to the left and lattice expansion compared to the standard undoped Co3O4.
06 September 2023 6,033 1 View
What type of chemical bond holds the atoms of water molecule together and strength of the ionic bond be related to the magnitude of the lattice energy?
29 August 2023 10,132 0 View
I have been working on a study of the sorption properties of a radio-isotope on a biotite surface. One of the methods of supporting the hypothesis of whether a reaction would happen or not is...
19 August 2023 4,300 1 View
I want to understand better what happens with the results of a XRD test on a pure Nickel powder with a Cu tube. If possible, I would like to discuss the possibilities of analyzing a sample with,...
16 August 2023 8,345 3 View
I downloaded a .cif file, but during importing this file via materials studio, the error would be created. It was said that this software cannot import it.
14 August 2023 848 1 View
You can send me the file at [email protected] , thank you
14 August 2023 2,752 1 View
My current research involves finding the properties of U(VI) sorption on Biotite, and my current team has been using only the final enthalpy to evaluate whether a reaction occurred. I am currently...
08 August 2023 7,946 3 View
I seek to understand the distinction between the two terms in relation to each research methodology.
07 August 2023 5,984 7 View
Can anyone help me with this XRD pattern of the High entropy alloy : (Al0.5 CoCrFeTi0.5 Si0.4) First we produced this material by mechanical alloying (250 hours, 350 prm) and then coated it by...
28 July 2023 8,815 1 View
Hi all, I want to adding prestress under cylindrical coordinate as a function of R and sita, can Abaqus do that? For example, how to add constant radial pressure as prestress to a ring in Abaqus?
26 July 2023 8,975 1 View
I have 6 different powder samples of Mechanically Alloyed magnetic High Entropy Alloy Powders as FeCoNiAlMn1-xCrx (x=0,0.2,0.4,0.6,0.8,1). I need to measure there microwave absorption properties...
25 July 2023 3,453 0 View
I would like to measure the surface charge of microspheres with size above 500 micrometer. Since they larger in size, I can't go for zeta potential analysis. It would be greatly appreciated if...
24 July 2023 8,562 2 View
to solve differential equations
18 July 2023 8,554 2 View
Seek guidance
08 July 2023 371 1 View
I was trying to create a FEM model of an LVI and CAI experiment. For the CAI simulation, the load displacement curve I obtained is way too stiff compared to the experimental result. The maximum...
07 July 2023 1,787 6 View
I try to use GASA2 to do the XRD rietveld analysis.After analysis, the α can not be fixed.I don't know how to calculate the rhombohedral lattice strain (90-α) through my rietveld analysis data. If...
07 July 2023 3,102 1 View
Normally tantalum has high affinity to react with oxygen and forms Ta2o5 . but we want to sputtered oxide free tantalum. is there any way to deposit oxide free tantalum or is there any Ta alloy...
04 July 2023 4,042 3 View
A lot of cases exist where CALPHAD (phase diagram) predicts a particular phase structure of a high-entropy alloy at room temperature, however, the high-entropy alloy when produced retains the...
28 June 2023 5,248 2 View
Basically I have powder samples of High Entropy Alloy Powders which are produced by mechanical alloying using Ball mill. I need microwave absorption property characterization of my samples but...
21 June 2023 1,377 3 View
What determines higher entropy and why does high temperature favor the higher entropy state?
10 June 2023 9,070 7 View