If I mix MDC and IPA in 80:20 volume ratio, what will be the outcome of it? Will they react or just mix in each other? Can one tell me the exact balanced reaction if it is at all taking place.
Dear Vedraj,
Dichloromethane Does NOT react with isopropyl alcohol at all. They simply mix together.
There is NO reaction between the two solvents.
By the way the abbreviation of dichloromethane is DCM and not MDC.
Hoping this will be helpful,
Rafik
No
For acid gas sweetening do we actually scrub the gases in amines or we absorb them? Are absorption and scrubbing synonyms? Can we scrub something apart from gases?
02 March 2017 6,591 4 View
What is the impact on heat duty of condenser or any heat ex-changer if it is over designed?
30 January 2017 439 3 View
How can I calculate the N2 flow rate knowing pressure in pipe and diameter of Pipe? There is 5KL tank of N2 having 4 kg/cm2 pressure. This tank has 1" pipe through which N2 is supplied to plant....
23 October 2016 4,210 6 View
What is the % recovery of IPA by normal distillation if I have a mixture of 50% IPA & 50% water?
13 July 2016 421 7 View
Is there any relation between type of nozzle used and particle size, its distribution, bulk density (BD) of the spray dried material? How does feeding pressure and hot air temperature affect the...
09 February 2016 6,549 4 View
I want to heat aqueous reaction mass in a jacketed vessel using steam. I know that steam is available at 1.5 Kg/cm2. I know jacket area and reactor diameters, length, etc.using which I have...
12 January 2016 9,425 9 View
What analytical technique is used to get the composition of streams from continuous distillation column (especially in refineries)? Is it GC, any other chromatography or any other technique?
02 December 2015 1,318 5 View
I have 1 Lit of liquid at room temperature. I want to sail it. I packed it in 5 lit container of HPDE (With proper primary and secondary packing) at normal conditions, but container broke due to...
24 November 2015 3,260 7 View
How can I say the mixture of A and B is going to form an azeotrope?
31 August 2015 1,209 10 View
I have multiple small samples of grass pollen with anthers. I want to find a method to identify concentrations of proteins, lipids, and other various elements for these samples. any suggestions?
28 July 2024 5,331 1 View
how to separate the organic reaction stereo isomers compounds are separate from the reaction mixture any simple methods are available
23 July 2024 8,025 4 View
Suggest the best and shortest route for the chemical synthesis and and green synthesis of magnetite(Fe3O4) The chemical synthesis should contain the least dangerous chemicals along with full...
21 July 2024 2,476 2 View
Chemical Engineering /Food Engineering
20 July 2024 4,152 4 View
I'm trying to create a new substance. Are there any important considerations when fabricating with CVD? For example, lattice constant If you have any such considerations, please let me know.
15 July 2024 9,359 0 View
Low magenic concenrartion indicating enhanced chemical weathering associated with warm and wet climate in detrital sediments.
14 July 2024 1,381 4 View
I am finalising my PhD and my word count is far greater than the faculty expect [80-100 K] Has anyone on here successfully submitted a PhD with a wordcount in excess of 120 K? Thanks in advance
27 June 2024 6,246 0 View
I am looking for professional software to draw the physical structure of nanoparticles or vesicles, not the chemical structures for which we use ChemDraw, but the actual physical structures,...
23 June 2024 1,292 3 View
How do different thin film deposition techniques (e.g., chemical vapor deposition, physical vapor deposition, spin coating) affect the efficiency and durability of thin films used in wastewater...
20 June 2024 9,789 2 View
I am trying to obtain the Raman spectrum of monolayer graphene deposited on Si/SiO2 and grown through CVD. I obtained the graphene from ACS. However, the microscope only has a 785 nm laser. From...
19 June 2024 2,148 4 View