Which software would be suitable for composite material buckling analysis?

More Ronen Yudzinsky's questions See All

What is the maximum time duration allowed between photoresist coating and exposure?

I have coated the Silicon wafer with photoresist (AZ1518) but until the exposure (Laser Writer) I had to wait for more than a week (Laser Writer was not operative) - would the photoresist still be...

03 January 2021 9,640 4 View

What are the most appropriate statistics [2, 3, or 4-way ANOVA] to use for my experimental design?

Hello Everyone, I could use some serious assistance. It was brought to my attention that use of individual T.tests [and F-tests] are not enough to discover statistical analysis as it increases...

15 April 2019 423 3 View

How can I correct this setup in Abaqus to run a solution for local buckling?

Hey all, here's the deets. I'm using an L beam depicted in the first picture, with t/b at 0.01, 0.02, 0.03, 0.04 and the other dimensions as shown, poisson at 0.35. Here's the steps I took in...

17 August 2015 7,146 3 View

Why does DMA Loss Modulus increase and decrease?

Hi, I understand the loss modulus increases as the polymer approaches the glass transition temperature, but why does the loss modulus decrease after the polymer temperature is higher then its...

23 January 2015 3,210 14 View

How to compare two groups with only two measurements?

Hiiiii everyone! I have an enquiry on statistical analysis. I was looking for many forum and it's still cannot solve my problem. I want to compare means of two groups of data but only with two...

03 March 2021 8,796 3 View

Enhanced Yellow Fluorescent Protein (Aequorea victoria) DNA sequence?

I am on the lookout for the Enhanced Yellow Fluorescent Protein (Aequorea victoria) DNA sequence. Does anyone know where I can find it? Thank you in advance

03 March 2021 3,568 1 View

What kind of fluid could I use for a pitfall trap that also does not invalidate molecular testing?

Hi, I want to start testing pitfall trap to obtain ants samples, but I need to conduct molecular analysis on those insects. So, what kind of fluid can I use? Ethanol expires too early and I need...

03 March 2021 5,978 5 View

What's the best way to measure growth rates in House sparrow chicks from day 2 to day 10?

What's the best way to measure growth rates in House sparrow chicks from day 2 to day 10? Since, the growth curve from day 2 to 10 won't be like the "Logistic curve" it might not follow logistic...

03 March 2021 1,401 3 View

Do we need to write protocol for a second study of a systematic review that has been registered and published?

I have conducted and published a systematic review and meta-analysis research with the topic related to public health and health pomotion (protocol was registed in PROSPERO). Now we want to...

03 March 2021 8,920 3 View

How to increase a model accuracy ?

dear community, my model is based feature extraction from non stationary signals using discrete Wavelet Transform and then using statistical features then machine learning classifiers in order to...

03 March 2021 6,994 5 View

Is there any tutorial for comsol general projections?

Hi, im trying to make a projection in a 3d comsol model. I have a non uniforme chanel and my intention is to get the average tempreture in the y-z cross section and se the average tempreture...

02 March 2021 4,624 4 View

Do I need to do linear regression before running mediation analysis using PROCESS MACRO by Hayes ?

I just wanted to check if I need to run a linear regression separately if I am using PROCESS MACRO to run mediation analysis. Thank you.

02 March 2021 4,359 3 View

Sample dilution for quantitative analysis using ELISA?

If the detection range is in ng/ml but the reference range is in ug/ml for a molecule or protein in serum or plasma .how to dilute and what is the initial volume to be taken for quantitative analysis

02 March 2021 7,670 3 View

Is There Any Feasible Method To Test Fluorescent Compounds Other Than Fluorescence Spectrometers ??

Is There Any Feasible Method To Test The Efficiency Of Fluorescent Compounds Other Than UV Spectrometers ? Suggestions Would Be Appreciated !

02 March 2021 5,785 3 View

Milad Kiaee

In my experience Abaqus does pretty good job with composite material and buckling and is very easy to get into.

Mehdi Lima

I also suggest ABAQUS.

Vladimir Kobelev

We use ANSYS with composite extension. Easy to use and provides reliable results. The modeling is in Workbench or APDL depending on model complexity.