Using liquids as superstrate in Fabry-Perot Cavity Antenna?

Hi, A Fabry Perot Cavity allows to increase the directivity of a low gain antenna by putting in the top of cavity a superstrate with high permittivity such as a ceramic (er=10.2). However,...

09 February 2021 6,799 8 View

How to improve results of system identification procedure?

Hello, I'm performing system identification of the lateral closed-loop dynamics of a quadrotor. My model receives a setpoint and should return position and acceleration. I've proposed a second...

07 February 2021 9,791 2 View

Distribution of modes fields ?

Hi, We find a specific distribution of electric fields in structure for different frequencies which can be seen using em solvers and known as modes. I would like to know how we can choose the...

04 February 2021 10,043 3 View

What is the maximum time duration allowed between photoresist coating and exposure?

I have coated the Silicon wafer with photoresist (AZ1518) but until the exposure (Laser Writer) I had to wait for more than a week (Laser Writer was not operative) - would the photoresist still be...

03 January 2021 9,640 4 View

What would happen if all nitrogen atoms in DNA were replaced by Carbon atoms ?

The DNA molecule is in the form of a double helix, The atoms which compose it are carbon, nitrogen, hydrogen, and phosphorus

02 January 2021 4,402 3 View

Which is more important for a journal? The impact factor or the quartile ranking?

I always found confusing both concepts! Which one do you think is more important? I give an example: The journal of "Theoretical and Applied Climatology" has an impact factor of 2.88, but it's a...

01 December 2020 8,608 19 View

Who can collaborate with us?

Salam (Hello)! We have prepared some new compounds with important potential to inhibit viruses. We are interested in inhibition of Hepatetis-B/C, Nipah, Nil and coronavirus. Who can collaborate...

22 November 2020 3,850 14 View

What is the most effective way to transfect HAP1 cells?

I am starting a project with the HAP1 cell line and previously our lab has had difficulty to transfect them. -we have nucleofection equipment - but have only been getting ~10% transfection -i...

19 October 2020 5,340 2 View

What effect do epidemics have on cerebral physiology?

How trauma and fear of infection can affect brain functions and structures?

10 October 2020 6,642 1 View

What are the XRD analysis conditions of the cement, sand and Limestone ?

I am a Phd student and I need to do XRD analysis on my pouder samples namely ( cement- sand- limestone and calcined clay). I was asked asked to specify the analysis conditions: -the nature of...

07 October 2020 5,737 6 View

Does the pressure(-600 mmHg) affects pH?

When I conducted the degassing experiment using decompression under anaerobic condition(and I used ferrous based chelating agent), the oxidized ferric were observerd. So, could you tell me the...

03 March 2021 4,892 5 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View

Which database would give me this list of chemical components?

Dear colleagues: I would like to know if anyone knows of a database that gives me the parameters pH, K, K, Mg, P, C, N, Zn, Cu, Ni and Cd of common foods. I find a lot of information of proteins,...

26 February 2021 5,525 3 View

Why is NH4OH added in heavy metals limit test?

The limit test I'm referring to is USP method II. In this procedure you need to dropwise add 6N of NH4OH to the sample until it the pH is alkali. After that you need to dilute and add HOAc until...

23 February 2021 2,049 3 View

Is there an ideal incubation time of RGO-modified SPCE before subsequent use, i.e., electrochemical characterization or further modification?

I notice that upon washing and air-drying of my RGO/SPCE surface and characterizing again via DPV, the current response towards ferricyanide probe significantly decreases. My worry is that the...

22 February 2021 5,324 3 View

No title

22 February 2021 9,932 11 View

Can anyone help or comment on solubilising chlorobutanol in aqueous injections in minimum time possible?

Please suggest solubilisation of chlorobutanol in injections. Tried pH and high temperature. But the issue is of assay drop. If anyone can suggest any solution. Its a commonly used excipient for...

21 February 2021 7,397 1 View

What reaction will occur when adding hexamine into ammonium nitrate in an acidic medium?

Hello, I am investigating properties of water in oil emulsion explosives. And adding hexamine (hexamethylenetetramine) into one of the phases that are used to make the emulsion should increase the...

21 February 2021 8,680 1 View

What properties of water shall be analyzed and evaluated to test the effectiveness of activated carbon?

I would like to ask what other properties of water (pH and such) shall be analyzed and evaluated to test the effectiveness of activated carbon from filtering the contaminants present in the water?

20 February 2021 9,422 8 View

Phenol-pH graphic?

We want to use phenol pH graphic to measure the pH of mediums before and after inhibitor application to cells. We have phenol absorbence values at 460, 560 and 720 nm wavelength. When we measure...

20 February 2021 7,700 3 View