What is the best Ceramics coating?

12 December 2017 0 7K Report

What is better for coating of steel in temperature around 350 oC, Al2O3 or SiO2 or ZrO2? What is the good reference for explanation?

Badges
Science topic

More Anees Abdullah Khadom's questions See All

What is the best reference for uncertainty analysis?

Uncertainty analysis is important in scientific research that contain experimental work. This analysis take into account the effect of errors that yield from instruments and experimental...

06 July 2018 4,385 6 View

Can Explain the following FTIR curves, and what is the expected chemicals in this solutions?

I have the following two curves in the attached figure for same acidic solution contains plant extract, but at different conditions, can discuss the following points: 1. shifting up or down (i.e...

03 April 2018 9,816 4 View

Elsevier and Springer vs SCOPUS?

Why some journals available in the well known publishers (such as, Elsevier and Springer), but it is not cited in the well known data base (such as, Scopus and Scimago)?

02 March 2018 4,132 1 View

What is the sign of anode and cathode?

Many of conflicts are arises from understanding of anode and cathode sign and the direction of current in electrochemical cells.

31 December 2017 5,322 3 View

What is your opinion in SCOPUS?

When we want to check the novelty and reputation of journals, we go to Thomson Reuters (or as known now, Clarivate Analytics) and SCOPUS data bases. But, I found some of the fake journals in...

10 November 2017 4,584 13 View

Real Scientific Research?

Is the real scientific research is secret and always hidden in a big research companies? Do you agree with the idea that the real scientific research is unpublished work?

10 November 2017 5,927 12 View

What is the best method for coating of metals during corrosion test?

I want to prepare the samples of coated steel, then we want to test the corrosion resistance of samples in absence and presence of coat. What is the best method to insure the uniform coating layer?

10 November 2016 6,070 18 View

Is there a limit for science?

Do you feel that the science is completed? Do you think that every thing was discovered and invented? Do you think that we just repeat the research in different conditions? Or you disagree with...

09 October 2016 1,251 23 View

Questions about Pickling process?

Questions about Pickling process? What is the optimum acid volume for practical Pickling process? What is the optimum time for practical Pickling process? What is the optimum inhibitor...

11 December 2015 7,656 0 View

How can we calculate the lifetime of pipe?

How can we calculate the lifetime of pipe? I mean the age of pipe before failure due to corrosion?

09 October 2015 1,215 2 View

Adhesion strength of coating?

How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...

10 August 2024 942 3 View

How do I conformally do PR spin coating on trench structure?

I did PR spin coating on trench structure. I used AZ P4620 PR and the thickness or PR is around 11um. The substrate is Si. And my trench structure depth is 141um(negative way). Even though I...

08 August 2024 2,298 0 View

How can I apply boundary conditions in an orthotropic steel deck numerical model using ABAQUS software?

I am trying to simulate vehicular loading on an orthotopic steel deck bridge section in ABAQUS software. The red arrow mark in the attached figure indicates the direction in which the vehicle will...

08 August 2024 719 0 View

How to fix errors in my heat transfer steel structure with reinforced concrete slab model Abaqus?

I have modelled a steel structure using beam elements in Abaqus and attached to this structure reinforced concrete slab. The analysis that I am making is heat transfer of the structure. The...

07 August 2024 1,028 0 View

How does grain and grain boundary affect the ceramic when studying its dielectric properties?

I am not able to get good literature and the physics behind how first these grains and grain boundaries arises out of no where when we make a pellet to study its dielectric properties and then how...

07 August 2024 5,177 3 View

Why do i have a weak plasma and no coating during rf sputtering?

I have been getting a low plasma and no coating while doing rf sputtering of copper doped ZnS using a power of 140 watts and at pressure of 6.5x10-3 Mb.

07 August 2024 4,526 4 View

What should be the sample container for the hydrothermal reaction in a microwave reactor at 180 °C for 10 min at the heating rate of 5 °C per minute?

Suggest one of them 1. Teflon-lined stainless steel autoclave: 2. Alumina (Al2O3) ceramic container

30 July 2024 7,326 1 View

What is the reason I get 400nm nanoparticles using an extruder with 200 nm membrane for cell membrane coating?

I am trying to coat my micelles and PLGA based nanoparticles with cell membrane using an Avanti mini extruder according to literature . I use 200nm membrane but my particles end up to be 400nm And...

30 July 2024 3,294 3 View

Will the catalytic effect of retained austenite happens in steels including RA?

The catalytic effect of retained austenite refers to the phenomenon wherein quenching steels with a small amount of retained austenite, when subjected to tempering at a specific temperature...

27 July 2024 8,508 0 View

Does it exist some special technique for cutting ceramic membranes for Cross-sectional FESEM images?

Does it exist some special technique for cutting ceramic membranes for Cross-sectional FESEM or SEM images?

25 July 2024 5,482 2 View