What if i use SnCl2.2H2O insted of SnCl2 anhydrous and N2H4.2H2O insted of N2H4?

More Harish Somala's questions See All

Can the value of N vary for the 2 vectors while performing Spearman rho?

While working with an SPSS file which produces a Spearman analysis on a pair of column I observed that the Value of N in the output is not the same. How is that possible? If I have 2 vectors X and...

12 November 2020 8,429 3 View

Ansys Fluent UDF ?

Hi, I am doing CFD analysis of journal and partial arc bearing. And I need to apply the following Reynolds boundary condition ( Pressure Boundary Condition ) by writing UDF. P=Pa = 0 at Z=0 and...

14 September 2020 2,069 3 View

Why nodal rotational velocities are zero in *STEADY STATE TRANSPORT?

I am performing a Steady State rolling analysis of a tire using input files. I have applied rotational velocity to all the nodes in the tire by creating a set using *TRANSPORT VELOCITY. I want to...

27 July 2020 8,873 2 View

For Scanning electron microscopy based trichome analysis of the leaf samples fresh samples can be preserved?

For SEM-based analysis of trichomes (soybean plant) can we preserve the samples collected for some period of time? or after following standard fixation procedures it can be preserved under low...

01 June 2020 5,665 1 View

Is there a standard protocol for SDS-PAGE?

I have tried SDS_PAGE and native PAGE in my laboratory with a locally purchased gel casting system from MEDOX, India. I never got a clear distinct ladder even for the molecular weight marker. i...

14 April 2020 2,792 8 View

Can you please suggest some Binders for TiO2 thin film coating on glasses ?

I want to coat tio2 thin film on glass for self-cleaning applications. for an adhesive property, please suggest some binders which won't affect photocatalytic activity.

13 February 2020 5,557 4 View

How to determine the primary productivity of a grassland ecosystem?

I am looking for a reliable method to determine the productivity in grassland and forest communities.

15 January 2020 6,592 3 View

No title

This question is related with epidemic models.

18 October 2019 9,310 1 View

Suggest me some websites to solve soltrace problems for parabolic dish solar collector ?

To solve the total heat flux problem in soltrace

22 September 2019 6,093 2 View

How could silica gels be used for biomolecule separations?

I have heard people commenting on usage of silica gel for desalting or flash columns in size exclusion chromatography for biomolecules. Can anyone explain on what could be the chromatographic...

17 September 2019 3,394 5 View

I need to image mesoporous silica nanoparticles that are in ~100 nm size and do high resolution TEM to look at mesopores. what grids should I use?

Need to image mesoporous silica nanoparticles using the TEM. Also, need high resolution TEM images to see the mesoporous structure. Kindly suggest what kind of grids to use. Thanks, Shatadru

02 March 2021 1,787 2 View

Can chitosan alone can act as a reducing agent for Cu(0) nanoparticle sythesis?

[Synthesizing Cu nanoparticles without using chemical reductants]

01 March 2021 8,359 1 View

What are the new 2D nanomaterials were used for Silver nanoparticles stabilization?

In the stabilization of AgNPs are vital in current research interest. However, some of the 2D nano-materials like graphene oxide, MoS2, etc... previously used to stabilize it. But still they shown...

01 March 2021 2,207 3 View

What is the state of the drug inside solid lipid nanoparticles (SLNs)?

I am a little confuse with the mechanism of solid lipid nanoparticles (SLNs). The main point of encapsulating drugs into SLNs is because some drugs have low solubility in water. Therefore, SLNs...

01 March 2021 3,703 3 View

How to check the uv-vis absorption of nanoparticle by surface plasmon resonance?

I try to check the uv-vis absorption of Indium nanoparticle. Now I am measuring in solution, can I measure it in the form of a film?

01 March 2021 930 3 View

Distribution of particles in metal matrix?

How would define the "good" and "poor" distribution of particles within the matrix. Is there a quantitative solution to assess the distribution of the particles, which then having denotation of...

28 February 2021 7,397 8 View

How can I calculate the rdf of water molecules around 'Na' ions that are closest(adsorbed) to the nanoparticle(solute)?

Hi, I want to calculate the radial distribution function for water molecules around the Na+ ions adsorbed on the surface of a spherical nanoparticle using the gromacs trajectory dynamically? For...

28 February 2021 5,650 1 View

LEDs on Vis Light photo degradation of MB water sol via N doped TiO2 in a mini flume?

Good day to all, I have no experience with light emitting diodes. I am building a glass mini flume to demonstrate the photo degradation of Methylene Blue in water running over self cleaning...

26 February 2021 4,026 5 View

Can anyone share his experience regards Smoothing in origin?

I am working on TiO2 composite material and the results of XRD have a lot of small/junk peaks and while I apply a smooth filter in Origin then the other characteristics peaks disappear so anyone...

26 February 2021 8,183 3 View

Why there are two peaks while using the mie plot of Silver nanoparticle?

Hi, I am trying to learn the theoretical modelling of silver nanoparticle using the Mie scattering theory. After that, I discovered a software named Mieplot developed by Philip Laven, where it...

25 February 2021 7,493 6 View

Alan F Rawle

Harish Somala Why not try it and see? You'll learn more that way...

An-Giang Nguyen

If you use water as the solvent, it's almost the same. And I would guess that some have synthesized tin-selenide using this approach and precursors.

Harish Somala

Alan F Rawle An-Giang Nguyen thanks for your response I will try it and let you know.

Chandan Kumar Tiwari Yes, it's N2H4.H20 only my bad thanks for your reply.