What could be a general residential load to overall load ratio?

21 February 2019 0 3K Report

I would like to know, what could be a general residential load to overall load ratio. Any reference/documents for such examples will be highly appreciated.

Thanks

Badges
Science topic

Similar topics
Correction

More Muhammad Ahsan Zamee's questions See All

How combine yolo with Faster R-CNN?

I want a model that is balanced with accuracy or speed, faster rcnn has high accuracy while yolo have fast speed. i am thinking to combine them to get a hybrid model to achieve both speed and accuracy

02 August 2024 3,104 0 View

What should be the sample container for the hydrothermal reaction in a microwave reactor at 180 °C for 10 min at the heating rate of 5 °C per minute?

Suggest one of them 1. Teflon-lined stainless steel autoclave: 2. Alumina (Al2O3) ceramic container

30 July 2024 7,326 1 View

Addition of EDTA during the synthesis of copper nanoparticles to prevent it from being oxidized?

I've attempted to use this method to synthesize copper nanoparticles. Copper nanoparticles can be synthesised using a variety of precursor materials. CuSO4, distilled water, NaOH, and EDTA are...

28 July 2024 8,027 3 View

Can I please ask why my samples from anaerobic bioreactor giving me different size PCR product even after multiple runs?

Hi everyone, I have extracted DNA from a biogas bioreactor using Qiagen kit and prep cDNA library then used this library as template to optimize primers for qPCR (taken from papers). Some of the...

23 July 2024 1,329 5 View

Swerling Characteristic functions?

Hello!!! I want to implement the Swerling characteristics functions (CF) directly in MATLAB without using its Fourier integral pairs...the Swerling CFs are actually Laplace Transform of the signal...

23 July 2024 4,925 1 View

Radar Detection Probabilities?

Currently I need to calculate detection probabilities (PD) from RCS data. Beta distribution parameters for this RCS data are calculated and will be used in Swerling0 Equation. The idea is based on...

22 July 2024 2,851 0 View

Why methanol and sulphuric acid used in the analysis of polyhydroxyalkanoates (PHA) by GC-MS?

Why methanol and sulphuric acid, used in the analysis of polyhydroxyalkanoates (PHA) methyl esters by GC-MS? Additionally, why do we typically use non-polar solvents in GC-MS?

22 July 2024 1,210 2 View

Radar Detection Probabilities using beta distributed Scattering Cross section?

Currently I need to calculate detection probabilities (PD) from radar cross section (RCS) data. Beta distribution parameters for this RCS data are calculated and will be used in Swerling0...

22 July 2024 868 0 View

I want to buy Hydrothermal Synthesis Autoclave from any European company. Can anyone suggest any company inside Europe?

Thanks

22 July 2024 1,143 3 View

Optimal condition for depositing FTO target 95:5% using sputter technique?

Hello I want to know about the sputtering condition of depositing FTO from target 95:5%. I tried with RF sputter in pressure 2.5Pa and 100 sccm Ar at room temperature but it showing no...

21 July 2024 1,680 2 View

How to convert a privately loaded document into a public document?

I attempted to make a privately uploaded text public but a window appeared that said an error occurred. There was no explanation provided as to why there was an error or what might be done to...

05 August 2024 8,025 7 View

Are the apoptotic cells is positive for γH2AX ?

It has been documented that apoptotic cells themselves can induce phosphorylation of serine 139 on H2AX (γH2AX) due to DNA fragmentation during apoptosis (doi: 10.1074/jbc.275.13.9390). As γH2AX...

28 July 2024 7,983 2 View

How does the digestate compare to other organic amendments regarding quality and performance in different countries?

Experts are welcome to share their experience country-wise so that we can make a nice document listing all the country-wise experiences. ? How does the digestate compare to other organic...

18 July 2024 5,225 3 View

Comment publier un travail sur la plateforme ?

Publier des documents scientifiques

26 June 2024 7,343 1 View

Can anyone share the CLSI M26-A document?

I'm a newbie to time-kill test, and tbh I've read every article about synergy between two or more drugs together but I'm still unable to grasp the nature and the standard protocol of a time-kill...

25 June 2024 7,392 0 View

How can I calculate accurate brick-joint interface stiffness for masonry in DIANA FEA?

Greetings everyone. To define the interface between mortar and brick during the modeling of masonry, I need normal and shear stiffness (Kn and Kt). I have tried some relationships found in the...

23 June 2024 6,015 0 View

Can you recommend me a methodology for a research paper on Nature-Based Tourism, specifically focusing on Natural Parks?

I am analyzing nature-based tourism in Mavrovo and Šar Mountain National Parks in North Macedonia. My focus is on documenting key natural sites, and tourist activities. Using available data, I aim...

18 June 2024 8,702 4 View

Hi guys. I am new on ResearchGate. I am wondering if there are templates for journals and other documents?

I am trying to access standard templates that I can use for my contributions so that my contributions are standardised inline with the ResearchGate platform.

16 June 2024 182 2 View

Protura for dummies?

Is it possible to tell Proturan families apart based on overall appearance? All the keys I have seen are based on very fine characteristics only readily visible on a slide. Also, there seem to be...

14 June 2024 6,334 0 View

How to Calculate the PEEQ for Mohr Coulomb?

Hi, I want to calculate the plastic equivalent strain for Mohr-Coulomb. I found a formula from Abaqus documentation. I have attached the photo of PEEQ calculation. But I want to figure out the...

28 May 2024 9,081 1 View