Google cars generate street views, but not exactly 3D model.
anyone is familiar with equipments/algo to generate interior 3D model or exterior 3D model? Kinect?
It seems UC Berkeley has substantial work on this.
A Photogrammetry solution like Agisoft Photoscan can be used for such tasks.
http://imasgal.com/fotogrametria_escaneado_muralla_romana_lugo/
Agisoft is a good software but it is not specialized for interior scene reconstruction. Some algorithms use stronger assumptions to reconstruct rooms from point clouds base for example on planar walls, etc.
Look at the following:
Folowing th remark from Bruno I can add a nice work :
https://halshs.archives-ouvertes.fr/halshs-00281219/document
A lot of work are now done using a priori knowledge in computer vision and photogrammetry in order to compute camera pose and 3D model.
We can found also similar work to compute camera calibration on facade for example.
During low-temperature testing, new diffraction peaks that appear could be indicative of several phenomena. In one of our tests, we observed notable new peaks around 40° and 45° in a specific...
06 August 2024 726 3 View
Looking for paper collaboration writers: Collaboration Model 1: 1.1 Based on the chosen topic, complete the paper writing, select an SCI or SSCI Q1 journal, submit using my QRCID, and complete...
27 July 2024 8,965 1 View
I run mechanochemical reactions that involves the use of a large amount of catalyst (1:1 molar ratio to the reactant). When I try to understand the effect of amount of catalyst on the reaction, I...
23 July 2024 9,938 1 View
Hello, I am searching for the binding position of a drug in a ribosome, based on previous work indicating it binds there. The resolution of the ribosome-drug Cryo-EM map is around 2.5 Å. I've been...
19 July 2024 2,155 0 View
zebrafish and mouse
19 July 2024 9,158 1 View
What happens in snapTotal- seq? (Single-cell Total-RNA Profiling Unveils Regulatory Hubs of Transcription Factors https://www.nature.com/articles/s41467-024-50291-3) In this protocol, several RT...
18 July 2024 10,010 0 View
I saw a paper(PHAN V-T, ZHANG X, LI Y, et al. Microscale modeling of creep deformation and rupture in Nickel-based superalloy IN 617 at high temperature [J]. Mechanics of Materials, 2017, 114:...
16 July 2024 8,436 0 View
Is there any benefit in knocking out the interferon receptor in 293T cells? In the context of creating RNA viruses 📷
13 July 2024 3,382 0 View
Hello everyone. I am working on my LV concentration porject, I use 500Kda hollowfiber to do it. The HCP and BSA removal rate is nearly 80%, but last time, I failed to run it. The HCP hasn't been...
11 July 2024 5,380 0 View
Humanistic care is mainly about caring for people's living conditions, affirming people's living conditions and dignity, and pursuing human freedom and liberation. With the continuous development...
10 July 2024 5,107 2 View
I have virus (viral hemorrhagic septicemia virus) in suspension and the experiment will not involve cells. What level of TCID50 is preferred?
11 August 2024 3,115 1 View
I am developing a predictive model for a water supply network that involves 20 influencing points. However, I only have historical data for 10 out of these 20 points. I would like to know how to...
10 August 2024 4,005 2 View
Usually, additive manufacturing techniques like SEBM, SLS, and SLM are used for interconnected porous lattice structure generation with sizes of >100–200 micrometers. Can the Fused Deposition...
09 August 2024 7,892 0 View
I need to model an anisotropic material in which the Poisson's ratio ν_12 ≠ ν_21 and so on. Therefore, the elastic compliance matrix wouldn't be a symmetric one. In ANSYS APDL, for TB,ANEL...
09 August 2024 5,048 2 View
I am trying to simulate vehicular loading on an orthotopic steel deck bridge section in ABAQUS software. The red arrow mark in the attached figure indicates the direction in which the vehicle will...
08 August 2024 719 0 View
Dear fellow researchers, I am currently working on a paper where I need to provide a reliable reference that defines and distinguishes between 3D mesh models and 3D city models. Although I am...
06 August 2024 9,986 2 View
I am working on Abaqus/Explicit(Quasistatic ) for the deformation of the auxetic structure model. Please explain how the plastic input value should be considered from the true stress-strain curve...
05 August 2024 454 3 View
I am seeking experimental or applicable data for the liner (LLDPE) interface in FLAC3D numerical modeling of a large stockpile. Could you please recommend suitable references? The preferred data...
05 August 2024 3,665 0 View
I am working on a SEM model where i have 7 latent variables (6 exogenous and 1 endogenous). In AMOS when I co-vary the exogenous constructs, only 2 paths are coming significant out of 6. But when...
03 August 2024 6,028 4 View
AI-driven technologies offer previously unheard-of capabilities to process enormous volumes of data, extract insightful knowledge and improve predictive models, according to the UN’s World...
31 July 2024 9,733 3 View