I am in need of LWON and LWN compounds in their perovskite phases. Please give some suggestions or idea .
Thanga Bharathi Tamilmani I have attached the JCPDS file for Lanthanum Tungsten Oxynitride.
I hope this will be helpful to you.
Warm regards,
Alvena Shahid
While I am working with RF Sputtering Unit, I am not able to achieve a healthy and dense plasma. Instead, I am ending up with a plasma that is weak and diverging from the placement of the target....
31 March 2023 2,127 2 View
Since I am working with the sputtering approach for the deposition of nanomaterials, I need to know the preparation methods of a sputter compact and extracting it without demolition.
26 March 2023 8,540 4 View
I am trying to synthesize a complex nitride material from their respective oxides. How can we achieve it by means of Molten salt synthesis technique?
13 March 2023 577 1 View
I am working on the synthesis of Rare earth complex oxides and Nitrides using MSS. Please suggest some good tips for carrying out the process.
12 January 2023 7,134 0 View
I'm trying to make a mixture of Gallium oxide (M.W = 187.44) and Tungsten Oxide (M.W = 231.85). How can I make a composite of these two different chemicals based on their molecular weights by...
06 September 2022 3,628 3 View
Metal Gallium is dissolved in 70% of conc.HNO3 in the molar ratio of 1:16. Therefore, How many grams of Gallium and how many litres of HNO3 to be taken for the above said molar ratios?
30 August 2022 980 1 View
I working on the synthesis of Lanthanum Nitride(LaN). I have Lanthanum oxide as the precursor which is hygroscopic in nature. Please suggest some methods for the synthesis of LaN.
16 August 2022 3,599 3 View
I am working on the preparation of ball milled tungsten powder, My query is with the selection of Milling media and balls and the BPR ratio.
12 August 2022 5,427 3 View
I am working in the field of sputtering. For making a sputter target, we need to take some amount of the respective powder and pelletize that. What is the relation between the atomic weight of the...
12 August 2022 3,405 0 View
I have prepared zinc oxide sputter target by using PVA as the binder. But in case of Tungsten target whether PVA is suitable and will it react with tungsten?
31 July 2022 2,073 4 View
Require for Rietveld refinement in XRD.
08 August 2024 3,081 2 View
Dear Researchers Kindly share JCPDS 65-7246 file Thanks in advance
04 August 2024 5,613 1 View
I'm trying to calculate the tolerance factors of the hydride perovskite and the value calculated by me and the reported values are contradictory. Need more clarity in using the correct ionic radii...
01 August 2024 2,614 1 View
Answered.
02 July 2024 2,942 5 View
We are fabricating a tandem structure where a ~50 nm thick WO3 film is deposited between two metal films using DC sputtering. We use a mixture of Ar and O2 gases at different flow rates while...
01 July 2024 2,686 2 View
Need JCPDS card No. 53-0780 if any one has access please . Thanks
26 June 2024 9,461 2 View
We are willing to make notice of Miller indices present in XRD powder and managed as their JCPDS files. We need them for various substances, e.g. Graphite, copper, lithium, and Iron. Kindly share...
23 June 2024 864 2 View
I have to join tungsten wire to metallic plate with that adhesive and entire assembly has to be heated upto 600C in ultra high vacuum. I know about zirconia paste but it is not readily available...
18 June 2024 3,092 3 View
in this link refractiveindex.info i didnt find i work on a simulation comsol of mesoporous perovskite i want to know the properties optoelectric and n,k coff
09 June 2024 2,071 4 View
for the Perovskite material
03 June 2024 1,027 1 View