I am encountering challenges with interference from particulate sloughing off from silver membranes that are interfering with my analysis.
you can dissolved silver by hard acid, nitrate acid for example. this is a good solved, because AgNO3 is not deposite. But by Sulfic acid, Chloride acid, silver can deposite form there salt, ie AgCL and Ag2SO4.
Thanks, Upi!
Hi all!...
29 May 2024 7,789 4 View
I have done the LC-MS result of my complex and its molecular weight is supposed to be 515.5 g/mole. I want someone who is experienced in LC-MS data interpretation. I have attached the picture of...
16 February 2024 382 2 View
I have to run a complete model but couldn't find any source or tutorial which can help me to run a complete model to test the last hypothesis of my study that moderator moderate the relationship...
22 December 2023 2,423 0 View
We want to analyze the heavy metals (Cd, Pb and Cr) in aqueous solution by using UV-VIS spectroscopy. The concentration range is 10-150ppm.
11 October 2023 3,122 3 View
Traps made from plastic bottles (by cutting the top one-third and using in an inverted position on the bottom) are working fine with pheromone lure + food-based attractant (FBA) but when FBA is...
14 July 2023 8,147 0 View
While designing a questionnaire if we use 3 point it looks easy to answer and is friendly for participant but less detailed is asked 5 looks moderate and 7 is extensive for the participant but...
13 July 2023 6,718 10 View
If both are different, what would be the difference?
21 June 2023 5,673 2 View
are there new methods or yet four tenets of trustworthiness that Lincoln and Guba established in 1982 is still the most valid and the easiest method. how to collect the evidence of achieving the...
29 May 2023 6,726 3 View
I need to test insulation resistance of insulated film coated over metal. The size of insulated metal sheet is about 2meter square. My requirement is that insulation resistance at every point...
30 January 2023 1,432 0 View
Is there any short-cut method that not only helps in finding the actual sample size but also justifies it? thanks
13 January 2023 9,142 6 View
I am using Rhodamine6G as gain medium and silver nanoparticles as scatterers on a microscope slide and laser input 532 nm comes from above.
09 August 2024 9,894 2 View
Hi everyone I need a file with a dirty and clean potato image
04 August 2024 7,199 4 View
The module of the CAD detector is corona Veo. It has been idle for a long time. And it was not well maintained before idle. I have replaced the gas filters and flushed the system with a 50/50...
01 August 2024 7,805 0 View
Hi researchers! I'm working on soil texture analysis, and the end result for sand is doubtful because there is black sediment appearing after drying, as shown in the figure. Is it considered sand?...
30 July 2024 557 2 View
I am trying to coat my micelles and PLGA based nanoparticles with cell membrane using an Avanti mini extruder according to literature . I use 200nm membrane but my particles end up to be 400nm And...
30 July 2024 3,294 3 View
Here, I have used Ag/AgCl as reference electrode and 0.5M KOH.
29 July 2024 4,538 3 View
We are working on a robot that cleans solar panels using fresh water supply and a rotating brush. We are trying to conserve as much water at possible by recycling the dirty water that is collected...
28 July 2024 5,778 2 View
Does it exist some special technique for cutting ceramic membranes for Cross-sectional FESEM or SEM images?
25 July 2024 5,482 2 View
isolation of microplastic from sludge sample using centrifugation ..
23 July 2024 6,418 0 View
Hello, I am currently working with Malaria Pf/Pan nitrocellulose membranes coated for malaria detection. After drying the coated membranes in an Incubator (overnight at 37°C), I've noticed that...
16 July 2024 7,937 1 View