Why Negative peak eluted in HPLC analysis?

I'facing problem while doing HPLC analysis due to negative peak was eluted which was corresponding to the principle peak RT. I tried to remove, with different solvents, but no use. i want to know...

26 November 2020 1,960 5 View

Can anyone please tell how to define link for Tuned mass Dampers using Sap2000/Etabs?

Dear Research scholars, I was doing my MTech thesis on pendulum based TMD and I was having trouble defining the link properties. I even followed the tutorials put on CSI website. still, I wasn't...

11 November 2020 8,309 11 View

How to solve "cz freeze python error in main script" Acp in Ansys probelm?

Greetings, I'm currently using the ANSYS 2020R1 crack version. I used this software for at least one month smoothly. But in the last few days, I'm facing this problem. I'm tired to solve this...

09 November 2020 6,431 2 View

What is the suitable optical filter for filtering 120MHz spacing combs from mode-locked laser for f-2f interferometry?

how to do f-2f interferometry from an octave spanning supercontinnum with frequency spacing 120MHz. Which would be the most suitable optical filter in this range for filtering f and 2f components...

12 October 2020 4,470 1 View

How we can design hybrid system between deep learning and swarm intelligence system or deep learning with fuzz?

Hybride intelligent system is good techniques used for solving diffrent optomization problems. Like classification, recognition ....etc Deep learning can be used with and hybrid with other machine...

08 October 2020 4,943 3 View

Why not there is common reference citation format for all journals?

Why not there is common reference citation format for all journals?

03 October 2020 8,137 3 View

Which force field should be used to simulate protein-protein complex in gromacs?

Hi, I have done a protein-protein docking. Now I want to perform MD in gromacs. I am confused with forcefields. When I tried to findout, everywhere it is written for protein-ligand but I couldn't...

29 September 2020 1,410 3 View

Anyone knows a reliable service who can run my data for me?

Please, if you know such a person or service, kindly email me the contact. I am looking for a reliable service to help me with my data set analyses. Thank you, Y. Essounga: [email protected]

23 September 2020 2,080 3 View

How authentic is this conference, https://www.scientificresearchers.org/icbe-8?fbclid=IwAR2_kI2DGxq7Hlc-Be6gIZKrwgXvjqg2Q5FT2SmIo2yiQecWAcMDpl7GZS0?

Good day, I just to want whether the above conference is a fake or not Regards

17 September 2020 3,912 7 View

Is it possible to run a doped system in CASTEP without creating supercell structure?

I was run a doped system in CASTEP without supercell and it was successfully optimized. But, I am not fully understood when I have to create a supercell. The unit cell I had used contain 28...

06 July 2020 7,657 2 View

How to polymerize TEOS?

I want to polymerize TEOS on a surface. I know that NH4OH is a preferred catalyst and an alcoholic solvent should be used .But I can not find certain amounts of each material to use. Does any one...

02 March 2021 1,404 6 View

How to quantify carbon deposition on CuZnAl catalyst?

Dear All, I want to quantify carbon deposition on the surface of the CuZnAl catalyst. I have tried thermogravimetric analysis, but I've got weight gain as the active Cu- get oxidised. Does anyone...

01 March 2021 1,907 3 View

How to calculate the crystallinity of cellulose film?

27 February 2021 2,753 4 View

How the Ground Plane implantation is performed without damaging (and w/o varying the undoped nature) the top Si (8-10 nm) in FDSOI technology ?

It is a general practice to introduce Ground Plane in FDSOI devices under the BoX. The Ground Planes are introduced by Ion Implantation through Top Si layer and Buried Oxide. I wanted to know that...

24 February 2021 5,974 4 View

How to dissolve cross-linked Amberlite IRC120 H, hydrogen form resin?

Hello all, I have used Amberlite IRC120 H, hydrogen form acidic cation-exchange resin for the ion-exchange of waterglass [sodium silicate solution -- 40% Sodium silicate (mol ratio > 3.2)...

21 February 2021 5,614 3 View

How to prepare electrolyte of NaClO4 salt for Na-ion battery? Any problem with this salt?

Hello, I am trying to make anode for Na-ion batteries. I have no experience with preparation of the electrolyte for any batteries. NaClO4 salt are available and I am planning to use EC:PC as...

21 February 2021 8,132 1 View

In methylene blue test Why is UV absorbance reading very low as soon adsorbent is added and then increasing before reaching equilibrium?

Hello, I'm working on removal of methylene blue. 01. in the dark test very first reading is taken 15 minutes after adding adsorbent to the dye solution and that UV absorbance reading is very...

19 February 2021 472 5 View

What is the optimal method to prepare a controlled porosity osmotic pump (CPOP) tablet for scanning electron microscopy?

In order to assess the shape and size of pores formed by dissolving the pore former in the semipermeable membrane structure, SEM images are needed. Cellulose acetate was used in the coating...

15 February 2021 6,135 3 View

Do the introduced salts (NaOH/ HCl) influence the spectroscopic shifts of the fluorescence excitation-emission matrix?

During the resin (XAD-8) fractionation of wastewater salts (NaOH or HaCl) are used for acid or base elutions/pH adjustments. Since the amount of introduced salt is minimal, so is it required to...

08 February 2021 9,489 2 View

Is carboxymethyl cellulose a better electrolyte host polymer than methyl cellulose and cellulose acetate?

I want to prepare a cellulose-based biopolymer solid electrolyte by solution casting technique. However, choosing the right cellulose derivative has been my major challenge. Among the many factors...

30 January 2021 5,355 3 View