Hello every one. I am working on modelling dental implant and need some guidelines. I have completed the initial step for implant which is to create cavity inside a jaw. For this i have used 4 mm Drill. Now i the next step is to remove the drill bit and to make a room for abutment structure. For this i have to reverse the motion of drill bit in upward direction. Please guide me, do i need to define additional step and what could be suitable boundary condition for reverse motion of drill bit out of jaw structure ? Please refers to attach file for more detail
Kindly provide the details of software used by you and various steps followed by you ,then I will try here.You are also requested to provide various parameters entered to simulate the procedure
Thanks
Kindly provide the details of software used by you and various steps followed by you ,then I will try here.You are also requested to provide various parameters entered to simulate the procedure
Thanks
I had used abaqus software..to model drill and teeth stricture .In this i used johnson-cook material model..
You may try 3 D Slicer which is free to use without any cost from https://www.slicer.org/
Tutorials are also available.
In the meantime I am trying to find out the way .
- Badges
- Science topic